Volume 28, Issue 4 (12-2020)
www.ijcm.ir 2020, 28(4): 1037-1050 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Asadpour Arzefooni, Izadifard, Ghazi. Investigation of structural and optical properties of CH3NH3SnI3 Perovskite layers synthesized by one-step thermal evaporation technique. www.ijcm.ir 2020; 28 (4) :1037-1050
URL: http://ijcm.ir/article-1-1566-en.html
URL: http://ijcm.ir/article-1-1566-en.html
Abstract: (1426 Views)
In this study, CH3NH3SnI3 Perovskite thin films were prepared on different substrates, Glass, FTO, and mesoporous TiO2 by easy and cheap thermal evaporation method in one step. Then, structural, morphology and optical properties of the layers were investigated. The XRD patterns and Raman spectra showed that all samples have α-phase tetragonal Perovskite structures and crystallinity, as well as the morphology of the samples significantly changes as the substrates changes. Investigation of the optical properties of the samples showed that despite small thickness of the layers (about 200 nm), the absorption coefficient of the layers (specially the layer grown on FTO substrate) is significantly large (in order of 105 cm-1). This result with the values of the bandgap of the layers (1.28-1.53 eV) show that the synthesized CH3NH3SnI3 Perovskite thin films are a very good candidate for using in solar cells as absorber layers.
Keywords: Perovskite solar cells, thermal evaporation method, CH3NH3SnI3 absorber layers, Organic-inorganic halide Perovskite.
References
1. [1] Yin W. J., Shi T., Yan Y., "Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber", Applied Physics Letters 104 (2014)063903. [DOI:10.1063/1.4864778]
2. [2] Kojima A., Teshima K., Shirai Y., Miyasaka T., "Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells", Journal of the American Chemical Society131 (2009) 6050-6051. [DOI:10.1021/ja809598r]
3. [3] Noel N. K., Stranks S.D., Abate A., Wehrenfennig C., Guarner S., Haghighirad A.A., Sadhanala A., Eperon G.E., Johnston M.B., Petrozza A.M., Herz L.M., Snaith H.J., "Lead-Free Organic-Inorganic Tin Halide Perovskites for Photovoltaic Applications", Energy Environmental Science 7 (2014) 3061 - 3068. [DOI:10.1039/C4EE01076K]
4. [4] Konstantakou M., Stergiopoulos T.," A critical review on tin halide perovskite solar cells", Journal of Materials Chemistry A 5 (2017) 11518-11549. [DOI:10.1039/C7TA00929A]
5. [5] Zhao Z., Gu F., LiY., Sun W., YeS., Rao H., Liu Z., Bian Z., Huang C., "Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12%", Advanced Science 4 (2017) 1700204. [DOI:10.1002/advs.201700204]
6. [6] Hao F., Stoumpos C.C., Cao D. H., Chang R.P.H., Kanatzidis M.G.,"Lead-free solid-state organic-inorganic halide perovskite solar cells", Nature Photonics 8 (2014) 489. [DOI:10.1038/nphoton.2014.82]
7. [7] Stoumpos C.C., Malliakas C.D., Kanatzidis M.G., "Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties", Inorganic Chemistry 52 (2013) 9019-9038. [DOI:10.1021/ic401215x]
8. [8] Malinkiewicz O., YellaA., LeeY. H., EspallargasG. M., GrätzelM., Nazeeruddin M. K., Bolink H," Perovskite solar cells employing organic charge-transport layers",Nature Photonics 8 (2014) 128-132. [DOI:10.1038/nphoton.2013.341]
9. [9] Polander L.E., Pahner P., Schwarze M., Saalfrank M., Koerner C., Leo K.," Hole-transport material variation in fully vacuum deposited perovskite solar cells", Apl Materials 2 (2014) 081503. [DOI:10.1063/1.4889843]
10. [10] Chen C.W., Kang H.W., Hsiao S.Y., Yang P.F., Chiang K.M., Lin H.W.,"Efficient and uniform planar-type perovskite solar cells by simple sequential vacuum deposition", Advanced Material 26 (2014) 6647-6652. [DOI:10.1002/adma.201402461]
11. [11] Birgin E.G., Chambouleyron I., Martı́nez J.M.," Estimation of the Optical Constants and the Thickness of Thin Films Using Unconstrained Optimization", Journal of Computational Physics 151 (1999) 862-880. [DOI:10.1006/jcph.1999.6224]
12. [12] Ippili S., Jella V., Eom J.H., Kim J., Hong S., Choi J.S., Tran V.D., Van Hieu N., Kim Y.J., Kim H.J., Yoon S.G., "An eco-friendly flexible piezoelectric energy harvester that delivers high output performance is based on lead-free MASnI3 films and MASnI3-PVDF composite films', Nano Energy 57 (2019) 911-923. [DOI:10.1016/j.nanoen.2019.01.005]
13. [13]Weiss M.,Horn J., Richter C., Schlettwein D.,"Preparation and characterization of methylammonium tin iodide layers as photovoltaic absorbers". physica status solidi A 213 (2016) 975-981. [DOI:10.1002/pssa.201532594]
14. [14] Sawada Y., Suzuki M.,"Thermal change of SnI, thin films.Part 3. Isothermal change under light radiation", Thennochimica Acta 243 (1994) 95- 100. [DOI:10.1016/0040-6031(94)85042-9]
15. [15] Williamson G.K., Hall W.H., "X-ray Line broadening from filed aluminium and wolfram", Acta metallurgica 1 (1953) 22-31. [DOI:10.1016/0001-6160(53)90006-6]
16. [16] Wang L., Huang X., Li D., Li F., Zhao Z., Li W., Huang Y., Wu G., Zhou Q., Liu B., Cui T., "Pressure-Induced Amorphization and Recrystallization of SnI2", The Journal of Physical Chemistry C 119 (2015) 19312-19317. [DOI:10.1021/acs.jpcc.5b04246]
17. [17]Quarti C., Grancini G., Mosconi E., Bruno P., Ball J. M., Lee M.M.,Snaith H.J., Petrozza A., Angelis F.D.,"The Raman Spectrum of the CH3NH3PbI3 Hybrid Perovskite: Interplay of Theory and Experiment", The journal of physical chemistry letters 5 (2014) 279-284. [DOI:10.1021/jz402589q]
18. [18] Tauc J., Grigorovici R., Vancu A., "Optical Properties and Electronic Structure of Amorphous Germanium", physica status solidi B 15 (1966) 627-637. [DOI:10.1002/pssb.19660150224]
19. [19] Amerioun M.H., Ghazi M.E., Izadifard M., Bahramian B., "Preparation and characterization of CuInS2 absorber layers by sol-gel method for solar cell applications", The European Physical Journal Plus 131 (2016) 113. [DOI:10.1140/epjp/i2016-16113-8]
20. [20] Yu Y., Zhao D., Grice C. R., Meng W., Wang C., Liao W., Cimaroli A. J., Zhang H., Zhu K., Yan Y., "Thermally Evaporated Methylammonium Tin Triiodide Thin Films for Lead-Free Perovskite Solar Cell Fabrication", RSC advances 6 (2016) 90248-90254. [DOI:10.1039/C6RA19476A]
21. [21] Zhao Z., Gu F., Li Y., Sun W., Ye S., Rao H., Liu Z., Bian Z., Huang C., "Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12%", Advanced Science 4 (2017) 1700204. [DOI:10.1002/advs.201700204]
22. [22] Tai Q., Cao J., Wang T., Yan F., "Recent advances toward efficient and stable tin-based perovskite solar cells", EcoMat 1 (2019) e12004. [DOI:10.1002/eom2.12004]
23. [23] Park JS., Kim DY., Kim WB., Park IK., "Realization of Eu-doped p-SnO2 thin film by spray pyrolysis deposition", Ceramics International 46 (2020) 430-434. [DOI:10.1016/j.ceramint.2019.08.279]
24. [24] Minhyung C.,"Fabrication of CH3NH3SnI3 perovskite solar cells using vacuum process",
25. AIP Advances 6 (2016). [DOI:10.1063/1.4950774]
26. [25] Hosseinpour R., Izadifard M., Ghazi M.,"Study of Structural and Optical Properties of Cu2ZnSnS4 Thin films Synthesized by Spin Sol-Gel",Iranian Jornal of Crystallography and Mineralogy 25 (2017) 635-646. [DOI:10.18869/acadpub.ijcm.25.3.635]
27. [26] Maheshwari B. U., Kumar V. S., "Influence of annealing on p-type Cu2ZnSnS4 thin film by dip
28. coating solution growth technique for the application of solar cell", Journal of Modern Optics 61 (2014)1225-1230. [DOI:10.1080/09500340.2014.928376]
29. [27] Fujiwara H., "Spectroscopic Ellipsometry: Principles and Applications", John Wiley & Sons (2007). [DOI:10.1002/9780470060193]
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
