OTHERS_CITABLE
ژئوشیمی رادیو ایزوتوپهای Rb–Sr و Sm–Nd و پتروژنز تودههای نفوذی مرتبط با کانیسازی مس پورفیری غنی از طلای منطقه اکتشافی ماهرآباد (شمال هنیچ)، شرق ایران
منطقه اکتشافی مس پورفیری غنی از طلای ماهرآباد در قسمت شرقی بلوک لوت و شرق ایران واقع شده است. ماهر آباد نخستین کانیسازی طلا - مس پورفیری که در شرق ایران کشف شده است. پانزده توده نفوذی (ائوس میانی با سن 39 میلیون سال) مرتبط با کانیسازی با ترکیبی از دیوریت تا مونزونیت شناسایی شد. تودههای مونزونیتی نقش مهم در کانیسازی مس- طلا داشتهاند. پورفیریهای مرتبط با کانیسازی تودههای نفوذی نوع I، متاآلومینوس، کالک آلکالن غنی از پتاسیم تا شوشونیتی هستند که در رژیم تکتونیکی جزایر قوسی تشکیل شدهاند. این سنگها با میانگین ویژگیهای ژئوشیمیایی 59% <SiO2، 15% < Al2O3، 2% > MgO، 3% < Na2O، ppm 870 < Sr، ppm 18> Y، ppm 92/1 > Yb؛ 55 < Sr/Y، LREE متوسط، بطور نسبی HREE کم، غنی شدگی عناصر LILE (Sr، Cs، Rb، K و Ba) و نسبت به عناصر HFSE (Nb، Ta، Ti، Hf و Zr) مشخص میشوند. آنها بطور شیمیایی شبیه برخی از آداکیتها هستند، اما ویژگیهای ژئوشیمیایی متفاوتی نیز با آداکیتهای نرمال دارند شامل مقدار K2O ، نسبت K2O/Na2O، YbN و i(87Sr/86Sr) بالاتر و Mg#، N(La/Yb)، N(Ce/Yb) و εNdکمتر در سنگهای ماهرآباد. این سنگها از نظر مقدار Sr، Sr/Y و الگوی عناصر REE نرمالیزه شده بیشتر شبیه کالک آلکالنهای غنی از پتاسیم تا شوشونیت هستند تا آداکیت. نسبت ایزوتوپ اولیه (87Sr/86Sr)i و i(143Nd/144Nd) اولیه با توجه به سن 39 میلیون سال محاسبه شد (اطلاعات منتشر نشده). نسبت ایزوتوپ اولیه (87Sr/86Sr)i در هورنبلند مونزونیت پورفیری بین7047/0 تا 7048/0 بوده است. نسبت (143Nd/144Nd)i اولیه نیز بین 512694/0 تا 512713/0 میباشد. میزان ایزوتوپ اولیه εNd بین 45/1 تا 81/1 است. براساس دادههای ایزوتوپی ماگمای اولیه از اسلب اقیانوسی منشا گرفته است. ذوب بخشی جبه هیبرید شده بوسیله مذاب غنی از سیلیکای مشتق شده از اسلب و یا ورود یک ماگمای التراپتاسیک مشتق شده از جبه غنی شده در طول یا قبل از تشکیل و مهاجرت ماگما میتواند مقدار K2O و نسبت K2O/Na2O بالا را توضیح دهد. اگر چه که مقداری از پتاسیم میتواند بوسیله هضم سنگهای رسوبی غنی از پتاسیم در طول جایگزینی ماگما اضافه شده باشد. مقادیر Mg# کم و MgO، Cr و Ni نسبتاً کم دلیل بر محدود بودن واکنش بین ماگما و پریدوتیت لبه جبه است. مدل منشایی نشان میدهد که ذوب بخشی درجه بالا (بیش از 30 درصد) آمفیبولیت گارنتدار (کمتر از 10 درصد گارنت) تا آمفیبولیت و عدم حضور پلاژیوکلاز به عنوان کانی باقیمانده در منشاء میتواند مقادیر متوسط Y و Yb، N(La/Yb) کم، نسبت Sr/Y بالا و عدم آنومالی منفی Eu در سنگهای ناحیه را نشان دهد. ویژگی ژئوشیمیایی این سنگهای گرانیتوئیدی یک راهنما را برای اکتشاف آینده کانسارهای مس پورفیری در شرق ایران نشان میدهد.
http://ijcm.ir/article-1-530-fa.pdf
2017-05-23
15
32
بلوک لوت
پتاسیم بالا
شوشونیت
آداکیت
عناصر REE
کانسارهای مس پورفیری.
Rb–Sr and Sm–Nd isotopic compositions and Petrogenesis of ore-related intrusive rocks of gold-rich porphyry copper Maherabad prospect area
(North of Hanich), east of Iran
The Maherabad gold-rich porphyry copper prospect area is located in the eastern part of Lut block, east of Iran. This is the first porphyry Cu-Au prospecting area which is discovered in eastern Iran. Fifteen mineralization-related intrusive rocks range (Middle Eocene 39 Ma) in composition from diorite to monzonite have been distinguished. Monzonitic porphyries had major role in Cu-Au mineralization. The ore-bearing porphyries are I-type, metaluminous, high-K calc-alkaline to shoshonite intrusive rocks which were formed in island arc setting. These rocks are characterized by average of SiO2> 59 wt %, Al2O3 > 15 wt %, MgO< 2 wt %, Na2O> 3 wt %, Sr> 870 ppm, Y< 18 ppm, Yb< 1.90 ppm, Sr/Y> 55, moderate LREE, relatively low HREE and enrichment LILE (Sr, Cs, Rb, K and Ba) relative to HFSE (Nb, Ta, Ti, Hf and Zr). They are chemically similar to some adakites, but their chemical signatures differ in some ways from normal adakites, including higher K2O contents and K2O/Na2O ratios and lower Mg#, (La/Yb)N, (Ce/Yb)N and εNd in Maherabad rocks. Maherabad intrusive rocks are the first K-rich adakites that can be related with subduction zone. Partial melting of mantle hybridized by hydrous, silica-rich slab-derived melts or/and input of enriched mantle-derived ultra-potassic magmas during or prior to the formation and migration of adakitic melts could be explain their high K2O contents and K2O/Na2O ratios. Low Mg# values and relatively low MgO, Cr and Ni contents imply limited interaction between adakite-like magma and mantle wedge peridotite. The initial 87Sr/86Sr and (143Nd/144Nd)i was recalculated to an age of 39 Ma (unpublished data). Initial 87Sr/86Sr ratios for hornblende monzonite porphyry are 0.7047-0.7048. The (143Nd/144Nd)i isotope composition are 0.512694-0.512713. Initial εNd isotope values 1.45-1.81. These values could be considered as representative of oceanic slab-derived magmas. Source modeling indicates that high-degree of partial melting (relatively up to 50%) of a basaltic garnet-bearing (lower than 10%) amphibolite to amphibolite lacking plagioclase as a residual or source mineral can explain most of the moderate to low Y and Yb contents, low (La/Yb)N, high Sr/Y ratios and lack of negative anomaly of Eu in the rocks of the district. The geochemical signature of the adakites within the granitoid rocks represents a characteristic guide for further exploration for copper porphyry-type ore deposit in Eastern Iran.
http://ijcm.ir/article-1-530-en.pdf
2017-05-23
15
32
Lut block
High-K
Shoshonite
Adakite
REE elements
Porphyry copper deposits
1
AUTHOR
2
AUTHOR
3
AUTHOR
OTHERS_CITABLE
مطالعه پیدایشهای مختلف پلی مورفهای آلومینوسیلیکات در سنگها/رگه های منطقه همدان، ایران: با نگرش ویژه بر منشاء رگه های کوارتز- کیانیت
منطقه مورد مطالعه قسمتی از زون سنندج-سیرجان یا زون زاگرس فلس مانند است. منطقه همدان از یک توالی دگرگونی متشکل از سنگهای دگرگونی ناحیه ای و مجاورتی درجه کم تا زیاد می باشد که توسط توده های پلوتونیک مافیک، حدواسط و فلسیک بریده شده اند. این توالی از سنگهای پلیتی، پسامیتی، مافیک، کالک پلیتی و کالک سیلیکات تشکیل شده است. سنگهای پلیتی فراوانترین سنگها در منطقه هستند که عمدتا" متشکل از اسلیت، فیلیت، میکا شیست، گارنت میکاشیست، گارنت-آندالوزیت (±سیلیمانیت/±کیانیت) شیست، گارنت-استارولیت شیست، میکاهورنفلس، گارنت هورنفلس، گارنت-آندالوزیت (±فیبرولیت)هورنفلس، کردیریت (±آندالوزیت) هورنفلس، کردیریت-پتاسیم فلدسپار هورنفلس و سیلیمانیت-پتاسیم فلدسپار هورنفلس هستند. در این توالی چندین میان لایه از آمفیبولیت ها و آمفیبول شیست هادر تناوب با سنگهای پلیتی یافت می شوند. گونه های مختلفی از رگه های سیلیسی آلومینوسیلیکات دار در منطقه یافت می شوند. ویژگیهای ایزوتوپی برخی از آنها یک منشا دگرگونی را برای آنها مشخص نموده است. در این مطالعه سه نسل مختلف کیانیت را بر مبنای ویژگیهای مختلف زمین شناسی مشخص کرده ایم، شامل: 1- دگرگونی (توزیع تصادفی داشته و معمولا" با سیلیمانیت/آندالوزیت همزیست هستند)، 2- ایجاد شده در اثر استرس (برش) (دروغ شکلهای کیانیت به جای آندالوزیت در زونهای برشی) و 3- دیر هنگام (گرمابی یا متاسوماتیک). به نظر می رسد رگه ها/بسته های کوارتز-کیانیت جوانترین بوده که به اندر کنش سیال– سنگ دیواره وابسته هستند. چرخش سیالات غنی از آلومینیم و سیلیسیم می تواند سبب تشکیل این رگه ها/بسته ها شده باشد.
http://ijcm.ir/article-1-531-fa.pdf
2017-05-23
33
42
گرمابی
دگرگونی
متاسوماتیک
کیانیت
استرس
رگه ها
همدان
ایران.
A study of various occurrences of the Al2SiO5 polymorphs in the rocks/veins of the Hamedan region, Iran: with special reference to origin of quartz-kyanite veins
The study area is a part of so-called Sanandaj-Sirjan zone or Zagros imbricate zone of the Zagros Orogen, Iran. The Hamedan region comprises a metamorphic sequence of low- to high-grade regional and contact metamorphic rocks intruded by mafic, intermediate and felsic plutonic bodies. The sequence comprises pelitic, psammitic, mafic, calc-pelitic and calc-silicate rocks. Pelitic rocks are the most abundant rocks in the region which are mostly composed of slates, phyllites, mica schists, garnet-mica schists, garnet-andalusite-(±sillimanite/±kyanite) schists, garnet-staurolite schists, mica hornfelses, garnet hornfelses, garnet-andalusite-(± fibrolite) hornfelses, cordierite-(±andalusite) hornfelses, cordierite-K-feldspar hornfelses and sillimanite-K-feldspar hornfelses. Several interlayers of amphibolites and amphibole schists alternate with pelitic rocks in the sequence. Various types of Al2SiO5-bearing silicic veins occur in the region. Isotope characteristics indicate metamorphic origin for some of them. In this study, we have defined three different generations of kyanite according to their various geological characteristics, including: (1) metamorphic (randomly distributed and commonly co-existed with sillimanite/andalusite), (2) stress-(shear)-induced (pseudomorphs of kyanite after andalusite in the shear zones) and (3) late-stage (hydrothermal or metasomatic) kyanites. The quartz-kyanite veins/pods are late structures that are created by interactions with wall rocks. Circulating Al- and Si-rich fluids may be responsible for formation of these veins/pods.
http://ijcm.ir/article-1-531-en.pdf
2017-05-23
33
42
hydrothermal
metamorphic
metasomatic
kyanite
stress
veins
Hamedan
Iran
1
AUTHOR
2
AUTHOR
OTHERS_CITABLE
ترکیب کانیشناختی و شیمیایی تورمالین مناطق نجمآباد، قشلاق، هیرد، ماهرآباد- خوپیک و ارتباط آن با نوع کانیسازی، شرق ایران
تورمالین در زونهای دگرسانی و کانیسازی مناطق اکتشافی مس- طلای پورفیری ماهرآباد- خوپیک، قلع – تنگستن نجم آباد، طلا- قلع هیرد و دایکهای پگماتیتی قشلاق تشکیل شده است. براساس مطالعات پرتو اشعه ایکس تورمالین مناطق ماهرآباد، قشلاق و هیرد از نوع شورل و مناطق خوپیک و نجم آباد از نوع درآویت هستند. براساس ترکیب شیمیایی، تمامی تورمالینهای مورد از نوع آلکالی هستند. نسبت Mg/(Mg+Fe) در تورمالین قشلاق 0.21-0.29، در هیرد 0.32-0.47، ماهرآباد 0.44-0.5، در نجمآباد و خوپیک 0.55-0.82 است. میزان Mg =1.9-2.3 تورمالین خوپیک بیشتر از ماهرآباد Mg= 1.4-1.9است. میزان متوسط TiO2 در تورمالین ماهرآباد 0.35 و در تورمالین خوپیک 0.19 است. در خوپیک بخش عمیقتر سیستم مس – طلای پورفیری رخنمون دارد. تورمالین نجمآباد بیشترین میزان (Mg= 2.2) و تورمالین قشلاق کمترین میزان (Mg=0.5-0.7) را دارد. تورمالین نجمآباد بیشترین میزان TiO2 (0.48%) و در سایر مناطق میزان TiO2 کمتر از 0.3 % است. بطور کلی رابطه معکوس بین میزان فراوانی CaO و Na2O در تورمالینهای مورد مطالعه مشاهده میشود. تورمالین قشلاق دارای کمتربن میزان CaO و بیشترین میزان Na2O است. میزان CaO و Na2O در تورمالین هیرد خیلی متغیر است.
http://ijcm.ir/article-1-532-fa.pdf
2017-05-23
43
54
تورمالین
نجمآباد
ماهرآباد
قشلاق و هیرد .
Mineralogical and Chemical Composition of Tourmaline from Najmabad, Gheshlagh, Hired and Maherabad-Khopik, and their relationship with types of mineralization, Eastern Iran
Tourmaline is present as alteration and mineralization at Maherabad and Khopik Cu-Au prospecting areas, Najmabad Sn-W-Au prospecting areas, Hired Au-Sn prospecting area, and within Gheshlagh pegmatite dikes. Based on X-ray diffraction graphs, Maherabad, Gheshlagh and Hired tourmaline are schorl, but Najmabad and Khopik are dravite type. Based on chemical composition, all of tourmalines belong to alkali group. The Mg/(Mg+Fe) ratio in Gheshlagh tourmaline is 0.21-0.29, in Hired is 0.32-0.47 and in Maherabad is 0.44-0.5 and in Najmabad and Khopik are Mg/(Mg+Fe)= 0.55-0.82. Khopik tourmaline contains considerably higher Mg (1.9-2.3) compared with the Maherabad (Mg = 1.4-1.9). The average TiO2 content of Maherabad tourmaline is 0.35 and Khopik is 0.19. At Khopik, deeper portion of the porphyry Cu-Au is exposed. Najmabad tourmaline contains the highest Mg (Mg= 2.2) and Gheshlagh the lowest Mg (Mg=0.5-0.7) and highest Fe (Fe= 1.9-2.3). Najmabad tourmaline contains the highest TiO2 (0.48%) and other tourmaline contains less than 0.3 % TiO2. In general, there is a reverse correlation between CaO and Na2O. Gheshlagh has the lowest CaO and highest Na2O. The CaO and Na2O content of tourmaline from Hired are very variable.
http://ijcm.ir/article-1-532-en.pdf
2017-05-23
43
54
Tourmaline
Najmabad
Maherabad
Gheshlagh
Hired
1
AUTHOR
2
AUTHOR
OTHERS_CITABLE
بررسی جایگاه زمین ساختی و سنگزایی سنگهای آتشفشانی پسا ائوسن منطقهی اباذر
(شمال شرق قزوین)
سنگهای آتشفشانی بعد از ائوسن البرز در شمالشرق قزوین شامل گدازههایی با ترکیب ریولیت، تراکیداسیت، تراکیآندزیت، آندزیت، تراکیبازالت و بازالت با بافت پرفیری، سنگهای آذرآواری و برشهای آتشفشانی سرخ رنگند که همهی آنها روی توفها و آذرآواریهای ائوسن قرار گرفتهاند. این سنگها نسبت به MORB از عناصر LILE غنی و از عناصر HFSE تهی شدهاند و ویژگیهای سنگهای آهکی-قلیایی وابسته به قوسهای آتشفشانی را نشان میدهند. بی هنجاریهای منفی عناصر Ti و Nb و غنیشدگی از عناصر گروه LILE دلیلی بر خاستگاه ماگمای به وجود آورندهی این سنگها از ذوب بخشی با درجهی پائین یک گوشتهی غنی شده در بالای یک زون فرورانش است. سنگهای ریولیتی تا آندزیتی برخلاف سنگهای بازالتی، بیهنجاری منفی Ba دارند که این امر از ویژگیهای پوستهی فوقانی و شاخص محیطهای با پتاسیم بالا محسوب میشود و دلالت بر نقش ذوببخشی پوستهی قارهای فوقانی در شکل گیری این سنگها دارد.
http://ijcm.ir/article-1-518-fa.pdf
2017-05-23
167
180
پسا ائوسن
بازالت
ریولیت
قوس آتشفشانی
آهکی- قلیایی.
Tectonic setting and petrogenesis of Post-Eocene volcanic rocks of Abazar district (NE of Qazvin)
Post-Eocene volcanic rocks of Alborz tectonic zone located in the NE of Qazvin, composed of rhyolite, trchydacite, trachyandesite, andesite, trachybasalt and basalt with porphyritic textures, pyroclastic rocks and volcanic red breccia which are settled alternatively on Eocene pyroclastics and tuffs. The volcanic rocks are enriched in LIL and depleted in HFS elements which may indicate a calc-alkaline volcanic arc. However negative Ti and Nb anomalies as well as enrichment in LILE implied in generation of these rocks by a low grade partial melting of an enriched mantle on a subduction zone. The presence of a negative Ba anomaly in rhyolitic to andesitic rocks is a common characteristic for the upper continental crust and is a typical feature for high-K suite which reveals the role of upper crust contamination.
http://ijcm.ir/article-1-518-en.pdf
2017-05-23
167
180
Basalt
Calc-alkaline
Magmatic-arc
Post-Eocene
Rhyolite.
1
AUTHOR
2
AUTHOR
3
AUTHOR
OTHERS_CITABLE
استفاده از ریزساختار بلورهای کوارتز و کلسیت و شارههای درگیر در تحلیل شرایط دگرشکلی و برآورد خاستگاه سیستم روراندهی کوهزاد زاگرس در منطقهی بختیاری
بررسی ساختاری از زاگرس مرتفع و جنوب غربی پهنهی سنندج-سیرجان در منطقهی چهار محال و بختیاری منجر به شناسایی یک سیستم گسلهای رورانده شده است که از شمال شرقی بهسمت جنوب غربی شامل برگههای روراندهی بن، هفشجان، فارسان، کوهرنگ و بازفت میباشند. در این مقاله با استفاده از بررسی ریزساختاری دانههای کوارتز و کلسیت و نیز شارههای درگیر درون بلورها، شرایط دگرشکلی این سیستم برگههای رورانده تحلیل شدهاند. بررسی ریزساختاری دانههای کوارتز از برگههای رورانده بن و هفشجان و پهنههای گسلی قاعدهای آنها، نشاندهندهی وجود شواهدی از دگرشکلی شکلپذیر بوده است بهگونهای که دمای دگرشکلی Cº250 تا Cº350 را برای این برگهها نشان میدهند. همچنین بررسی زمینگرماسنجی با استفاده از ماکلهای مکانیکی کلسیت نمونههای این برگهها نیز نشاندهنده دمای Cº250 برای آنهاست. بررسی شارههای درگیر رگههای کوارتز این برگههای رورانده نیز دمای همگونی تا Cº220 را برای ادخالهای اولیه نشان میدهد. این بررسیهای زمیندماسنجی نشان میدهند که شرایط فیزیکی دگرشکلی در زاگرس مرتفع و حاشیهی جنوب غربی پهنهی ساختاری سنندج-سیرجان دارای اختلاف چشمگیری نیستند؛ گرچه دمای دگرشکلی بهطور عمومی از بخش داخلیتر به خارجیتر کوهزاد زاگرس کاهش مییابد. این دادهها بیانگر آن است که منطقهی بین برگههای رورانده بن و هفشجان، که بهعنوان حاشیهی جنوب غربی پهنهی ساختاری سنندج-سیرجان و بخش داخلی کوهزاد زاگرس در نظر گرفته میشود، ویژگیهای یک گسترهی انتقالی را نشان میدهد. بنابراین برگه روراندهی فارسان یا گسل اصلی وارون زاگرس، که بهعنوان مرز بین بخش داخلی و خارجی کوهزاد زاگرس در نظر گرفته میشود چنین ویژگی را نداشته و انتقال از پهنهی ساختاری سنندج-سیرجان بهعنوان بخش داخلی به زاگرس مرتفع یا بخش خارجی کوهزاد زاگرس بهصورت پهنهای انتقالی متشکل از یک سیستم راندگی است که بهطور جزئی درگیر بودن پی سنگ را نیز نشان میدهد.
http://ijcm.ir/article-1-519-fa.pdf
2017-05-23
181
194
زاگرس مرتفع
برگههای رانده
ریزساختار کلسیت
ریزساختار کوارتز
شارههای درگیر.
Application of quartz and calcite microstructures and fluid inclusions on estimation of deformation condition and origin of the Zagros orogen thrust sheets in the Bakhtyari area
Structural analysis of the High Zagros Zone and southwestern rim of the Sanandaj-Sirjan Zone in the Chaharmahal-va-Bakhtyari area resulted in recognition of a thrust system comprises the Ben, Hafshejan, Farsan, Kuhrang and Bazoft thrust sheets from NE to SW. In this study, quartz and calcite microstructures as well as fluid inclusions have been utilized to inspect deformation conditions of the thrust sheets. Microstructural study of quartz grains from the Ben and Hafshejan thrust sheets and their basal thrust zone show evidence of ductile deformation that demonstrate the deformation temperature from 250º to 350ºC for the sheets. Geothermometry study of the sheets using calcite mechanical twins also reveals temperature of 250ºC for the sheets. Fluid inclusions study on quartz veins from these thrust sheets display homogenization temperature up to 220ºC for primary inclusions. This geothermometry survey demonstrates that physical conditions of deformation do not change significantly but increases gradually from the southwestern rim of the Sanandaj-Sirjan Zone toward High Zagros Zone. Based on present data, the area between the Ben and Hafshejan thrust sheets where is considered as the internal part of the Zagros orogen, display characteristics of a transitional zone. Therefore, the Farsan thrust sheet or the Main Zagros Reverse Fault which is known as the margin between the Arabian Plate and Central Iran do not pose this character. The boundary between the Sanandaj-Sirjan Zone as the internal part and the High Zagros Zone as the external part of the Zagros orogene is not abrupt and occurs across a transitional zone comprises a thrust system where basement is also partially involved.
http://ijcm.ir/article-1-519-en.pdf
2017-05-23
181
194
High Zagros
Thrust sheets
Calcite microstructure
Quartz microstructure
Fluid inclusions.
1
AUTHOR
2
AUTHOR
3
AUTHOR
OTHERS_CITABLE
سازوکار دایکی شدن و انتقال مذاب، توده گرانیتوئیدی میشو (شمال غرب ایران)
توده گرانیتوئیدی میشو در شمال غربی کوههای میشو و جنوب غربی فروافتادگی فشاری مرند رخنمون یافته است. پاراژنز کانیشناسی این توده شامل کوارتز بیشکل تا نیمه شکلدار، فلدسپار پتاسیم به دو فرم میکروکلین با ماکل مشبک و ارتوکلاز بیشکل تا نیمه شکلدار، دو نسل بیوتیت و زیرکن، پلاژیوکلاز نیمه شکلدار تا شکلدار با ترکیب الیگوکلاز – آلبیت، اپیدوت ماگمایی، تیتانیت و آپاتیت است. یک نسل از زیرکنها و بیوتیتها ویژگیهای رستیتی نشان میدهند. نمونههای توده از بافتهای شاخص تاثیر فشار حین تبلور (نظیر بافت میرمکیتی، سمتیافتگی ضعیف کانیهای میکا، تکههای میکروکلین درون ارتوکلاز) تشکیل شدهاند. نمونههای توده ویژگیهای ژئوشیمیایی محیطهای همزمان با برخورد و S نوع را نشان داده و نابرجایند. توده در منطقهای به شدت گسلی واقع شده، و سن نسبی توده پالئوزوئیک است. سنگ خاستگاه توده مخلوطی از متاگریوک و متاپلیت است. ویژگیهای صحرایی، کانیشناسی، ژئوشیمیایی توده، وجود برونبومهای غنی از میکا در سنگهای توده در کنار تودههای نعل اسبی، صعود سریع در اثر دایکی شدن با انتشار شکستگی را بهعنوان سازوکار اصلی انتقال مذاب و باقی ماندن دو نسل زیرکن و بیوتیت در سنگهای توده را نشان میدهد. از اینرو فرایند گنبدی شدن در جایگیری توده و سرشتیهای آن تاثیر ناچیزی داشته است.
http://ijcm.ir/article-1-520-fa.pdf
2017-05-23
195
208
تودهی میشو
بیوتیت رستیتی
ساز و کار صعود
دایکی شدن .
Dyking Mechanism and Melt transfer, Misho granitoid Pluton
(NW of Iran)
Misho granitoid pluton is exposed at the North Western part of the Misho Mountains and at the South Western part of the Marand compresional depression. The minerals in the rocks of this pluton include unhedral to sub – hedral quartz, K – feldspar both as microcline with tartan twinning and sub - hedral to unhedral orthoclase, two generations of biotite and zircon, subhedral to euhedral plagioclase (oligoclase - albite), magmatic epidote, titanite and apatite. One generation of zircon and biotite show restitic characteristics. The samples show distinct textures indicating the effect of pressure during crystallization (such as myrmekitic textures, slight alignment of mica, fragments of microcline in orthoclase). The samples exhibit syn-collisional, displaced and S-type geochemical features and the pluton is exposed in an area which is tectonically very faulted. The relative age of the pluton is Paleozoic. The source material for this pluton was a mixture of Meta – greywacke and metapelite. Field relations, mineralogy, geochemistry, existence of mica – rich enclaves and horse – shoe shape of the pluton all suggest a rapid ascent due to dyking and fracture distribution as the main mechanism for melt transport and formation of two generation of zircon and biotite. Therefore diapirism had negligible rule in emplacement and characteristics of misho granitoid.
http://ijcm.ir/article-1-520-en.pdf
2017-05-23
195
208
Misho Pluton
Restitic biotite
Ascent mechanism
Dyking
1
AUTHOR
2
AUTHOR
3
AUTHOR
4
AUTHOR
5
AUTHOR
OTHERS_CITABLE
کانیشناسی، ژئوشیمی و سنگزایی اسکارن منطقهی زرو (شمال غربی استان یزد)
اسکارن زرو در شمال غربی استان یزد در کمربند ماگمایی سنوزوئیک ایران مرکزی قرار دارد. گسترهی سنگهای این منطقه، سنگهای آتشفشانی ائوسن همراه با تودهی نفوذی گرانیتوئدی است. سنگ آهکهای سازند تفت (کرتاسه زیرین) در غرب منطقهی زرو، میزبان اسکارن و مرمر زائی با کانیسازی مس و به دور از تودهی نفوذی هستند. کلینو پیروکسن، گارنت، ایلوائیت (ilvaite)، وزوویانیت، ترمولیت، اپیدوت، کالکوپیریت، مگنتیت، کلسیت و کوارتز از مجموعه کانیهای مشاهده شده هستند. روابط پاراژنتیکی این کانیها یک خاستگاه چندزادی را برای مجموعه اسکارنی نشان میدهد. بلورها و تودههای سیاه رنگ ایلوائیت همیافتی نزدیکی را با زون کلینوپیروکسن (هدنبرژیت) و گارنت (آندرادیت) دارند، احتمالا این همیافتی جانشینی را نشان میدهد. شکلگیری ایلوائیت با واکنش زیر امکانپذیر است:
Andradite + Fe (OH)2 + CO2 = ilvaite + magnetite + quartz + calcite + H2
Hedenbergite + magnetite + Fe (OH)2 = ilvaite
کانیهای اولیه اسکارن زرو دردمای°C 550 شکل گرفتهاند. دگرسانی کانیهای بی آب و ساخت مجموعههای کانیائی آبدار از دمای تقریبی زیر °C470 در فوگاسیته بالای اکسیژن شروع شده است.
http://ijcm.ir/article-1-521-fa.pdf
2017-05-23
209
222
اسکارن
زرو
ایران مرکزی
پیروکسن
گارنت
ایلوائیت
مگنتیت.
Mineralogical, geochemical and petrogenesis studies of Zaroo skarn
(North West of Yazd Province)
The Zaroo Cu-skarn is located NW of Yazd province, within the Cenozoic magmatic belt of Central Iran. The widespread rocks in the region are Eocene age volcanic with granitoids intrusives. The Cretaceous limestones in western parts of West Zaroo are hosted by skarn – marble mineralization. The skarns are distal type and are characterized by assemblage: Clinopyroxene, garnet, ilvaite, vezovianite, termolite, epidote, chalcopyrite, magnetite, calcite and quartz. The paragenetic relationships of these minerals have revealed a polygenetic nature of skarn assemblage reveal a polygenetic nature. Black crystals and masses of ilvaite have a close association with hedenbergite clinopyroxene and andradite garnet zone, likely as replacement bodieds. The formation of ilvaite is related to following reactions:
Andradite + Fe (OH)2 + CO2 = ilvaite + magnetite + quartz + calcite + H2
Hedenbergite + magnetite + Fe (OH)2 = ilvaite
The early skarn minerals are formed at 550 ºC and the decomposition of early minerals to formation of final hydrous assemblages started below 470 ºC in fO2.
http://ijcm.ir/article-1-521-en.pdf
2017-05-23
209
222
Skarn
Zaroo
Central Iran
pyroxene
garnet
ilvaite
magnetite
1
AUTHOR
2
AUTHOR
3
AUTHOR
4
AUTHOR
OTHERS_CITABLE
بررسی شیمی کانی کلریت بهعنوان روشی در زمین دماسنجی دگرسانی گرمابی در نهشته سولفیدی قزل داش خوی، شمال باختری ایران
کانیهای گروه کلریت دارای دامنهی گستردهای از ترکیب شیمیایی هستند که بازتابی از شرایط فیزیکوشیمیایی تبلور آنها است. مدل محلول جامد (جانشینی کاتیونی) در شبکه بلوری کلریت بهصورت موفقیت آمیزی در تعیین دمای تبلور این کانی در محیطهای گوناگون زمینشناسی همچون نهشتههای معدنی، دگرسانیهای گرمابی، دگرگونی درجه ی پایین و دیاژنز توسط برخی از پژوهشگران بهکار رفته است. در این پژوهش، از روش زمین دماسنجی کانی کلریت در تعیین دمای دگرسانی گرمابی و کانهزایی نهشته ی سولفید تودهای ناحیه قزل داش شمال باختر شهرستان خوی استفاده شده است. برای این کار، نمونه برداری سطحی و عمقی (از مغزههای حفاری) انجام گرفت و پس از بررسیهای سنگنگاری (میکروسکوپی) و کانیشناسی به روش پرتو ایکس (XRD)، تعداد 11 بلور کلریت که به بخشهای مختلف سیستم دگرسانی وابستهاند، انتخاب و تجزیه شیمیایی نقطهای با دستگاه ریزکاوالکترونی روی آنها انجام گرفت. فرمول ساختاری کلریتهای انتخابی بر مبنای تعداد 14 اکسیژن محاسبه شد. کلریتها دارای تغییرات ترکیبی و جانشینیهای اتمی مشخصی هستند که بازتابی از دمای تبلور آنهاست. تشکیل کلریتهای موجود در بخشهای گوناگون سنگهای کانهدار در گسترهی دمایی 318-368 درجه سانتیگراد، و برای کلریتهای موجود در سنگهای دگرسان بیکانه 202-210 درجه سانتیگراد روی داده است. کلریتهای با دمای بالا محتوی Si کمتری نسبت به کلریتهای متبلور شده در دماهای پایین دارند.
http://ijcm.ir/article-1-522-fa.pdf
2017-05-23
223
232
کلریت
زمیندماسنجی
جانشینی اتمی
دگرسانی
کانهزایی
سولفید تودهای
قزل داش
خوی.
Mineral chemistry of chlorite as a method for geothermometry of hydrothermal alteration from Qezildash sulfide deposit, NW IRAN
Chlorite group minerals have a wide range of chemical compositions which reflect the physicochemical conditions of their crystallization. The solid solution (cationic substitution) model in crystal lattice of chlorite were satisfactorily used in estimation of its formation temperature in different geologic environments such as ore deposits, low-degree metamorphism, hydrothermal alteration and diagenesis by some researchers. In present research, the chlorite geothermometry method was used in the estimation of temperature of hydrothermal alteration and massive sulfide mineralization in the Qezildash area, northwest of Khoy city. In this work, at first, petrographic and mineralogical (XRD) studies were carried out on the samples taken from surface and borehole drilling cores. Eleven chlorite crystal grains which belong to different parts of hydrothermal system were selected and analyzed by electron microprobe equipment. Structural formulate were calculated on the basis of 14 oxygens. Chlorites have significant compositional variations and atomic solid solutions which reflect their formation temperatures. Chlorites from different parts of orebody and unmineralized altered rocks gave temperatures of formation of 318 to 368°C, and 202-210°C respectively. High-temperature chlorites have smaller Si contents than chlorites formed at low- temperatures.
http://ijcm.ir/article-1-522-en.pdf
2017-05-23
223
232
Chlorite
Geothermometry
Solid solution
Alteration
Mineralization
Massive sulfide
Qezildash
Khoy.
1
AUTHOR
2
AUTHOR
OTHERS_CITABLE
سنگشناسی و سنگزایی آمفیبولیتهای موجود در مجموعهی افیولیتی خوی- شمال غربی ایران
در مجموعه دگرگونی شمال خوی، سنگهای آمفیبولیتی حجم زیادی دارند. این سنگها از نظر سنگنگاری شامل انواع آمفیبولیت معمولی، آمفیبولیت موسکویتدار، آمفیبولیت بیوتیتدار، آمفیبولیت گارنتدار و آمفیبولیت پیروکسندار هستند. بررسی پروتولیت این سنگها نشان دهندهی خاستگاه آذرین آنهاست. هم چنین این سنگها از نظر ماگمایی درسریهای توله ایتی و آهکی- قلیایی قرار میگیرند و نیز از نظر محیط زمینساختی عموماً در دو محیط زمینساختی بازالت کف اقیانوسی و قوسی قرار دارند. این دو محیط زمینساختی متفاوت به روشنی درنمودارهای REE و عنکبوتی قابل جدایشاند، بهطوری که نمونههای مربوط به بازالت کف اقیانوسی نسبت به نمونههای قوس از شیب بیشتر و فراوانی LREE بالاتری برخوردارند. با توجه به اینکه محیطهای زمینساختی حوضهی پشت قوس قارهای میتوانند ویژگی MORBوIA را هم زمان نشان دهند لذا ممکن است سنگهای آمفیبولیتی مورد بررسی درچنین محیط زمینساختی به وجود آمده باشند.
http://ijcm.ir/article-1-523-fa.pdf
2017-05-23
233
246
آمفیبولیت
پروتولیت آذرین
سریهای توله ایتی
خوی.
Petrology and petrogenesis of Amphibolitic rocks of the Khoy ophiolitic complex-NW Iran
Amphibolitic rocks are the main part of the north of Khoy metamorphic complex. Petrographicaly these rocks are normal amphibolite, muscovite amphibolite, biotite amphibolite, garnet amphibolite and pyroxene amphibolite. The protolith of these rocks is mainly igneous. These rocks belong to tholeiitic and calc-alkaline series and Ocean Floor Basalt and Arc tectonic setting. These two distinctive tectonic setting clearly are distinguishable in REE and spider diagrams as samples from Oceanic Floor Basalt are steeper and enriched LREE than those from Arc samples.Considering the fact that Sialic Back Arc Basins can show MORB and Arc characters together, therefore probably amphibolitic rocks of study area generated in this tectonic setting.
http://ijcm.ir/article-1-523-en.pdf
2017-05-23
233
246
Amphibolite
Igneous protolith
Tholeiitic series
Khoy.
1
AUTHOR
2
AUTHOR
3
AUTHOR
4
AUTHOR
OTHERS_CITABLE
بررسی خاستگاه و سازوکار تشکیل گلاکونیهای سازند آیتامیر در جنوب شرق درگز
سازند آیتامیر (آلبین - سنومانین) در حوضهی رسوبی کپه داغ در شمال شرق ایران گسترش دارد. این سازند بیشتر از ماسه سنگ، شیل، سیلتستون و چند افق پر فسیل تشکیل شده است. گلاکونی یکی از اجزای اصلی تشکیل دهندهی رخسارههای سیلیسی آواری این سازند است. گلاکونیهای این سازند از نوع برجا و نیمه برجا هستند که تحت شرایط فیزیکو شیمیایی مناسب جانشین کوارتز، فلدسپات، خرده سنگ (چرت)، میکا و سیمان کربناتی شدهاند. جانشینی غیر انتخابی، جورشدگی نسبتاَ ضعیف، همراه با فسفات، دندان ماهی و چروکیدگی در برخی گلاکونیها از مهمترین شواهد تشکیل گلاکونیهای اتوکتونوس است. این گلاکونیها از کمی تکامل یافته به رنگ سبز کمرنگ تا بسیار تکامل یافته به رنگ سبز خیلی پر رنگ مشاهده شده است. تشکیل گلاکونیها از نهشتههای دریایی (سنگ میزبان مناسب )، همراهی گلاکونی در آشفتگیهای زیستی، حضور پلتهای گلاکونی نارس به شکل سالم و وجود تکههای پراکنده گلاکونی در ماتریس به صورت هاله سبز رنگ از شواهد دیگر تشکیل گلاکونیهای برجا است. گلاکونیهای نیمه برجا درسازند آیتامیردرقاعدهی سطوح پیشروی دریا دیده میشوند و با داشتن ویژگیهایی شامل حاشیه اائیدی جبه های آهکی پیرامون گلاکونی، گردشدگی خوب، جورشدگی نسبتا َخوب، حضور گلاکونیها در رده بندی مورب، میزان شکستگی پایین درگلاکونیهایی که ناشی ازجابجایی محلی و محدود در داخل بسترحوضه هستند، قابل تشخیصاند.
http://ijcm.ir/article-1-524-fa.pdf
2017-05-23
247
254
آیتامیر
گلاکونی
برجا
نیمه برجا.
Study of genesis and mechanism of glauconite formation in the Aitamir Formation at south east of Dargaz
Aitamir Formation (Albian–Cenomanian) crops out in the Kopet-Dagh basin in north-east Iran.This formation is mainly composed of sandstone, shale, siltstone, and several shellbeds. One of the major components in all of the siliciclastic facies is glaucony. They are autochthonus and parautochthonus types which have formed in suitable physico-chemical conditions and replaced quartz, chert, feldspar, mica and carbonate cement. Nonselective replacement, poorly sorted, along with phosphate, fish teeth and morphological shrinkage are major evidences of autochthonus glaucony. These glauconies are pale green nascent, evolved and highly evolved. Glaucony within marine deposits (suitable host rock), associate with bioturbation, presence of pellets of nascent glaucony and debris of sparse glaucony within the matrix forms of greenhalo are others evidences of autochthonus glauconites. Characteristics of paraautochtonus glaucony, including: ooidal rims around rounded peletic glauconites, well sorted glauconys, presence of glauconites within cross lamination and low fractures in peletics glauconites due to local reworking into in early transgressive surface.
http://ijcm.ir/article-1-524-en.pdf
2017-05-23
247
254
Aitamir
glaucony
autochthonus
paraautochtonus.
1
AUTHOR
2
AUTHOR
3
AUTHOR
4
AUTHOR
5
AUTHOR
OTHERS_CITABLE
کانیشناسی و نحوهی تشکیل کانسارهای نسوز میشدوان بافق، ایران مرکزی
کانسار میشدوان بافق یکی از مناطق شناخته شدهی ایران مرکزی است که دارای پتانسیل معدنی از کانیهای گروه سیلیمانیت است. سازندهای رخنمون شده بیشتر از سنگهای دگرگون ناشی از دگرگونی ناحیهای وابسته به دوره ی پرکامبرین هستند. کانیهای گروه سیلیمانیت در زمینهی انواع شیستها پراکنده هستند. منطقه زمین ساخته بوده و در مراحل بعد از دگرگونی ناحیهای، تودههای آذرین نفوذی نیز در سنگها تزریق شدهاند. منطقهی مورد بررسی دارای گسترشی در حدود 95 کیلومتر مربع است که بر اساس نوع، مقدار و کیفیت کانیهای گروه سیلیمانیت به چهار بلوک ذخیره، تقسیمبندی شده است. در هریک از بلوکها ترانشهها و چاهکهای اکتشافی حفر شد. نمونهبرداری به صورت سیستماتیک از رخنمونهای سطحی، ترانشهها و چاهکها انجام شد. برای شناسایی نوع مادهی معدنی، از میان نمونههای گرفته شده، تعدادی نمونه برای بررسی مقاطع نازک و تعدادی نیز برای آنالیزهای XRD و XRF ارسال شدند. با توجه به بررسیهای انجام گرفته مشاهده شد که مادهی معدنی از نوع کیانیت و سیلیمانیت بوده و کانی آندالوزیت بهندرت دیده میشود. با توجه به نوع سنگهای اطراف و درجات دگرگونی آنها و بررسیهای مقاطع نازک و XRD، تغییر فاز آندالوزیت اولیه به سیلیمانیت و کیانیت در اثر دگرگونی در دمای بالای مجاورتی، بهعنوان عامل مهم این پدیده معرفی میشود. همچنین با توجه به نتایج XRD از نمونههای برداشت شده که فقط یک نمونه مقدار کمی کیانیت نشان داده است، چنین به نظر میرسد که عیار کلی مادهی معدنی کم بوده و از این نظر وضعیت رضایت بخشی را از منطقه نشان نمیدهد. از این رو فرآوری این مادهی معدنی با مشکلات زیادی همراه بوده یا احتمالا فاقد توجیه اقتصادی است.
http://ijcm.ir/article-1-525-fa.pdf
2017-05-23
255
266
کانیشناسی
آندالوزیت
سیلیمانیت
کیانیت
کانیهای نسوز
شیست
کانسار میشدوان بافق.
Mineralogy and genesis of the Mishdovan refractory ore bodies Bafgh, Central Iran
Bafgh Mishdovan ore body is located in the Central Iranian zone and is recognized as potential of the sillimanite group minerals. In this region, the outcrops of the different formations can be observed which mainly consist of the Precambrian metamorphic rocks. Silimanite group minerals are existed in the schistic rocks. The area is located in a tectonized zone and subjected to regional metamorphism then intruded by igneous plutonic rocks. The study area has 95 km2 coverage and according to quality and grade of sillimanite group minerals can be divided to four different mineral zones. Primary exploration activities have been carried out by digging of the trenches and test pits. Samples were taken systematically from outcrops, trenches and test pits. In order to recognize of the ore body (via mineralogy studies), some samples were sent to the laboratory for thin section studies and also XRD and XRF analysis. Based on these investigations, it is verified that the refractory minerals are consisted of sillimanite and kyanite and rarely andalusite. Based on the hosted rocks type and their metamorphic stages, thin section studies and XRD analysis, the phase transition of the primary andalusite into sillimanite and kyanite due to the high temperature-contact metamorphism can be justified. Also regarding the XRD analysis, only one sample contains some kyanites, so it seems that ore bodies is low grade and beneficiation of this industrial minerals face many difficulties or may not be feasible.
http://ijcm.ir/article-1-525-en.pdf
2017-05-23
255
266
Mineralogy
Andalusite
Sillimanite
Kyanite
Refractory minerals
Shist
Bafgh Mishdovan mineral deposit.
1
AUTHOR
2
AUTHOR
3
AUTHOR
OTHERS_CITABLE
تأثیر مادهی آلی بر تغییرات کانیشناسی فلوگوپیت و موسکویت در اندازهی رس در محیط
ریشهی یونجه
هوادیدگی کانیهای پتاسیمدار، خاستگاه اصلی پتاسیم در خاکهاست که در شرایط کمبود این عنصر اهمیت ویژهای دارد. بررسیهای زیادی در مورد تأثیر انواع گیاهان و میکروارگانیسمها بر تغییر و تبدیل کانیهای میکایی و رهاسازی پتاسیم از آنها صورت گرفته است ولی تاکنون پژوهشی در مورد تأثیر مادهی آلی بر تغییرات کانیشناسی میکاها انجام نشده است. این پژوهش با هدف بررسی تاثیر میزان مادهی آلی بر تغییر و تبدیل فلوگوپیت (میکای سه جائی) و موسکویت (میکای دوجائی) در محیط ریشهی یونجه صورت گرفت. آزمایش گلدانی در قالب طرح کاملاً تصادفی با آرایش فاکتوریل در سه تکرار انجام شد. بستر کشت مخلوطی از شن کوارتزی، دو نوع کانی میکایی (موسکویت یا فلوگوپیت) و مادهی آلی در سه سطح شاهد، نیم و یک درصد بود. در دورهی 120 روزهی کشت، گیاهان با محلول غذایی کامل یا بدون پتاسیم تغذیه شدند. پس از پایان دورهی رشد، گیاه برداشت و عصارهگیری به روش خاکستر خشک انجام و مقدار پتاسیم با فلیم فتومتر تعیین شد. همچنین کانیهای میکایی بستر کشت و محصولات هوادیدگی آنها از شن کوارتزی جدا شدند و بخش رس آنها با پراش پرتو ایکس بررسی شد. نتایج نشان داد که در بسترهای دارای فلوگوپیت، حضور مادهی آلی در هر دو حالت تغذیهای باعث افزایش معنیدار مقدار کل پتاسیم جذبشده نسبت به بسترهای بدون مادهی آلی شده است. پراش پرتو ایکس، تغییر کانیشناسی فلوگوپیت را در هر دو حالت تغذیهای به خوبی نشان داد ولی هیچگونه تغییر کانیشناسی در موسکویت با پراش پرتو ایکس تشخیص داده نشد. با حضور مادهی آلی، در هر دو حالت تغذیهای، تغییرات کانیشناسی چشمگیری در کانی سهجائی فلوگوپیت ایجاد شده است. به نظر میرسد که تجزیهی مادهی آلی و فعالیتهای ریشه، قدرت اسیدی ریزوسفر [خاک ریشه] را افزایش داده و رهاسازی پتاسیم را از کانی سهجائی فلوگوپیت تسهیل کرده و در پایان باعث تبدیل این کانی به ورمیکولیت و تا حدودی اسمکتیت و نیز تشکیل مقدار ناچیزی کلریت شده است. بنابراین تأثیر مادهی آلی روی تغییرات کانیشناختی به نوع کانی میکایی وابسته است.
http://ijcm.ir/article-1-526-fa.pdf
2017-05-23
267
280
رهاسازی پتاسیم
فلوگوپیت
موسکویت
مادهی آلی
ورمیکولیت
اسمکتیت
کلریت.
Effect of organic matter on mineralogical changes of clay sized phlogopite and muscovite in alfalfa rhizosphere
Weathering of K-bearing minerals as the major source of potassium in soils is of special importance under K deficient conditions. Many studies have been carried out on the effect of plant types and microorganisms on the transformation of micaeous minerals and their potassium release. However, there is no information on the effect of organic matter on mineralogical changes in micaceous minerals. The objective of this study was to investigate the effect of organic matter on transformation of muscovite (a dioctahedral mica) and phlogopite (a trioctahedral mica) in the rhizosphere of alfalfa. A pot experiment was carried out in a completely randomized design with factorial combination and three replicates. The growth medium was a mixture of quartz sand, micaceous mineral (muscovite or phlogopite) and organic matter (0, 0.5 and 1 %). During 120 days of cultivation, plants were irrigated with either complete or K-free nutrient solution and distilled water as needed. At the end of cultivation, plants were harvested and their K uptake was measured by flame photometer following the dry ash extraction. Also, the mica particles and their weathering products in each pot were separated from the quartz sand and their clay fraction analyzed using x-ray diffraction (XRD). The results showed a significant increase of total K uptake occurred in pots containing trioctahedral mica (phlogopite) and organic matter as compared to those with no organic matter amendment, under both nutrient solution treatments. XRD data clearly showed the transformation of phlogopite under both nutrient solution treatments, but no XRD detectable transformation of muscovite was recognized. Organic matter amendment seems to have created considerable mineralogical changes in clay sized phlogopite. Root activities and organic matter decomposition appear to have increased the acidity of rhizosphere which, in turn, facilitated the K release from trioctahedral mica (phlogopite) and induced the transformation of phlogopite to vermiculite and a minor quantity of smectite and chlorite. In conclusion, the effect of organic matter on mineralogical changes greatly depends on the type of micaceous mineral.
http://ijcm.ir/article-1-526-en.pdf
2017-05-23
267
280
Potassium release
phlogopite
muscovite
organic matter
vermiculite
smectite
chlorite
1
AUTHOR
2
AUTHOR
OTHERS_CITABLE
تهیهی نانوذرات گارنت ایتریوم آهن (YIG) به روش سل-ژل و بررسی ویژگیهای مغناطیسی آن
در این پژوهش نانوذرات گارنت ایتریوم آهن با فرمول شیمیایی Y3Fe5O12 به روش سل-ژل اسید سیتریک تهیه شد. نانوذرات تهیه شده به روش پراشسنجی پرتو ایکس (XRD), FT-IR و TG-DTA بررسی شد. ویژگیهای مغناطیسی نانوذرات با دستگاههای مغناطیسسنج نوسانی (VSM) و ترازوی فارادی (منحنی M-T) اندازهگیری شد. نتایج الگوی پراشسنجی پرتو ایکس نشاندهندهی کاهش کمینه دمای برشتن نانوذرات گارنت ایتریوم آهن در این روش نسبت به کمینه دمای برشتن در تهیهی همین گارنت به روش متداول سرامیکی است. مغناطش اشباعی و دمای کوری نانوذرات گارنت ایتریوم آهن نسبت به نمونهی کپهای کمتر است که این کاهشها به ترتیب بر اساس مدل پوسته-هسته و کاهش برهمکنشهای ابرتبادلی بحث شده است.
http://ijcm.ir/article-1-527-fa.pdf
2017-05-23
281
286
گارنت ایتریوم آهن
نانوذرات
روش سل-ژل
ویژگیهای مغناطیسی.
Preparation of yttrium iron garnet (YIG) nanoparticles by sol-gel method and investigation of its magnetic properties
In this work yttrium iron garnet (Y3Fe5O12 or YIG) nanoparticles have been prepared by sol-gel method, raw materials were dissolved in citric acid and warmed up and stirred to form a gel. Synthesized nanoparticles were characterized, using X-ray diffraction (XRD), FT-IR and TG-DTA methods. Magnetic properties of the nanoparticles were measured, using vibrating sample magnetometer (VSM) and Faraday balance (M-T curve). XRD patterns showed that calcining temperature is far below than that is related to the bulk sample prepared by conventional ceramic technique. From the result of VSM and Faraday balance it was found that the saturation magnetization and Curie temperature of nanoparticles are lower than those related to the bulk sample. The decrease of saturation magnetization and Curie temperature were discussed based on core-shell model and superexchange interaction, respectively.
http://ijcm.ir/article-1-527-en.pdf
2017-05-23
281
286
YIG
Nanoparticles
Sol-gel
Magnetic properties
1
AUTHOR
2
AUTHOR
3
AUTHOR
OTHERS_CITABLE
ساخت و بررسی تأثیر نانوذرات Sb2O3 بر ابررسانای 2223 – Bi
در این مقاله، ساخت نانوذرات اکسید آنتیموان (Sb2O3) به روش محلولی و نیز تأثیر این نانوذرات بر خواص ابررسانای پایهی بیسموت گزارش شده است. دمای بحرانی، چگالی جریان بحرانی و انرژی فعالسازی به روش چهار میلهای و خواص مغناطیسی نمونهها با استفاده از پذیرفتاری مغناطیسی اندازهگیری شدند. ریزساختار و ریختشناسی نمونهها با XRD، SEM و EDX بررسی شدند. نتایج حاصل از الگوهای پراش نشان می دهند که فاز 2223 در نمونههای ابررسانای پایهی بیسموت با درصد کم نانوذرات اکسید آنتیموان و زمان پخت طولانی افزایش مییابد. همچنین در بررسیهای انجام شده روی نمونههای ساخته شده، مشخص شد که نانوذرات اکسید آنتیموان تاثیر چندانی روی فازهای موجود و دمای بحرانی این نوع ابررسانا ندارد، ولی باعث افزایش نسبی چگالی جریان بحرانی و انرژی فعالسازی میشوند.
http://ijcm.ir/article-1-528-fa.pdf
2017-05-23
287
300
نانوذرات
دمای بحرانی
چگالی جریان بحرانی
پذیرفتاری مغناطیسی
انرژی فعالسازی .
Fabrication and the effect of Sb2O3 nanoparticles on Bi-2223 superconductor
In this paper Sb2O3 nanoparticles are synthesized by solution method. The effect of these nanoparticles on the Bi-2223 superconductor properties has been investigated. The critical temperature, critical current density and activation energy were measured by the standard four-probe method. Magnetic properties of the samples were measured by using the AC magnetic susceptibility. The microstructure and morphology of samples have been studied by X-ray diffraction, scanning electron microscope and energy dispersive X-ray. The results of X-ray diffraction patterns show that the low amount of Sb2O3 and long annealing time enhance the fraction of Bi -2223 phase. Also the results show that the Sb2O3 nanoparticles do not change the phases and critical temperature of Bi-2223 superconductor, but by increasing the amount of Sb2O3 nanoparticles, the critical current density and the activation energy of the samples increase.
http://ijcm.ir/article-1-528-en.pdf
2017-05-23
287
300
Bi-2223 superconductivity
nanoparticles
critical temperature
critical current density
activation energy and magnetic susceptibility.
1
AUTHOR
2
AUTHOR
OTHERS_CITABLE
ساخت نانوبلورکهای 3-xSrxMnO3/0Ca7/0La به روش فعالسازی مکانیکی و بررسی ویژگیهای ساختاری و مغناطوترابری آنها
در این پژوهش منگنایتهای لانتانیوم جانشانی شده با کلسیم و استرانسیوم، 3-xSrxMnO3/0Ca7/0La (3/0، 2/0، 1/0، 0 = x)، به روش فعالسازی مکانیکی ساخته شد. برای ساخت این منگنایتها، اکسیدهای 3O2Mn، 3O2La، CaO و SrO به عنوان مواد اولیه، با عنصرسنجی(استوکیومتری) مناسب، با هم مخلوط شدند. فرآیند فعالسازی مکانیکی در دمای اتاق، در آسیای SPEX 8000 انجام شد. طرحهای پراش پرتو X (XRD) برای تشخیص تشکیل ساختار به عنوان تابعی از زمان آسیاکاری، به کار گرفته شد. نتایج پراش پرتو X نشان میدهد که پس از آسیاکاری تا حد اکثر 10 ساعت، با استفاده از نسبت وزنی ده به یک گلوله به پودر، بلورکهایی با ساختار راستگوشی (اورتورومبیک) با گروه فضای Pbnm برای تمام ترکیبها بدست میآید. اندازهی میانگین دانههای بلوری (بلورکها) با استفاده از تصاویر TEM و نتایج حاصل از محاسبهی نیم پهنای قلههای XRD حدود 20 نانومتر است. مغناطومقاومت الکتریکی نمونهها در میدان مغناطیسی خارجی تا 5/1 تسلا و در دماهایی از 77 تا 300 کلوین با روش چارسوزنی اندازهگیری شد. دمای گذار فلز – نارسانا (TM-I) برای ترکیبهای گوناگون بدست آمد که ترکیب 3MnO3/0Ca7/0La بیشترین دمای گذار یعنی K 190 را دارد، بیشینه درصد مغناطومقاومت (MR) منفی برای همین ترکیب پیرامون دمای K 190 و میدان T 5/1، برابر 38% است.
http://ijcm.ir/article-1-529-fa.pdf
2017-05-23
301
312
منگنایتها
فعالسازی مکانیکی
مغناطومقاومت ابرغولآسا
گذار فلز – نارسانا.
Synthesis of La0.7Ca0.3-x SrxMnO3 nano-crystallites by mechanical activation and study their microstructure and magnetotransport properties
In this work, substituted lanthanum manganites with calcium and strontium, La0.7Ca0.3-xSrxMnO3 (x = 0, 0.1, 0.2, 0.3), were prepared by a high-energy ball milling method and their microstructure and magnetotransport properties were studied. The raw materials were Mn2O3, La2O3, CaO and SrO, mixed in the stoichiometric ratio to obtain these manganites. The mechanical activation process was performed at room temperature in a SPEX 8000 mixer/mill. X-ray diffraction was used to determine the phase transformation as a function of the milling time. The XRD results showed that after up to 10 h of milling process, using a charge ratio of ball to powder of 10:1, crystallite powder with an orthorhombic structure (S.G. Pbnm) was formed for all compounds. Mean crystallites size of the samples obtained from the XRD patterns and TEM micrograph are about 20 nm. Magneto-resistivity of the disc shape samples was measured using four point probe technique, in the temperature ranging from 77 to 300 K in presence of an external magnetic field up to 1.5 T. Maximum metal-insulator transition temperature is 190 K for La0.7Ca0.3MnO3. In this compound the maximum magnetoresistivity factor is 38%, in magnetic field of 1.5 T and temperature of 190 K.
http://ijcm.ir/article-1-529-en.pdf
2017-05-23
301
312
Manganite
Magnetoresistance
Mechanical activation
Metal-Insulator Transition
1
AUTHOR
2
AUTHOR
3
AUTHOR
4
AUTHOR