fa
jalali
1383
1
1
gregorian
2004
4
1
12
1
online
1
fulltext
fa
اندازهگیری کیفی عناصر سمّی جمع شده در صافی دود کش کارخانههای آلاینده هوای تبریز
Qualitative Analysis of Toxic Elements that Collected on Smoke-Stackers of Factories in Tabriz City
اغلب کارخانههای آلاینده هوای شهرها، دارای دودکش مجهز به صافیهای مختلف هستند که تا حدودی از شدت آلودگی هوا میکاهند. در این پژوهش سعی شده است تا با آنالیز مواد خروجی از صافی چند کارخانه مهم شهر تبریز به وسیله دستگاه طیفسنج پرتو X، نوع عناصر موجود در آنها مشخص شود، که میتواند شاخص مهمی در تشخیص و رفع مواد آلاینده باشد. همچنین چند ترکیب عمده موجود در صافیها، و نیز مقایسهای میان نمونههای گرفته شده از نقاط مختلف کارخانهها معرفی شدهاند.
In this research we apply X-Ray Fluorescence (XRF) method to determine toxic and heavy metals in stack gases that arises from industrial furnaces. Three factories were selected and various samples were collected from their furnaces and smoke-stacker, and the results compared each other.
Qualitative Analysis, XRF, Air Pollution.
آلودگی هوا, XRF , آنالیز کیفی.
3
10
http://ijcm.ir/browse.php?a_code=A-10-44-40&slc_lang=fa&sid=1
2017/06/7
1396/3/17
2017/06/7
1396/3/17
سعید
برادران دیلمقانی
0031947532846002511
0031947532846002511
Yes
آزمایشگاه پرتو X .
کامران
رجبی
0031947532846002512
0031947532846002512
No
آزمایشگاه پرتو X .
fa
سنتزتودههای کروی TS-1 با استفاده از رزین با قابلیت تبادل آنیون به عنوان درشتقالبگیر
Synthesis of spherical TS-1 materials using an
anion exchange resin as a macrotemplate
در سالهای اخیر سنتز تودههای کروی زئولیتی، مانند S-1، ZSM-5 و بتا، با استفاده از رزینهای با قابلیت تبادل آنیونی، گزارش شده است. این روش بر پایه خود پیوندی بین محلول سنتز زئولیت و رزینهای با قابلیت تبادل آنیونی، به عنوان درشت قالبگیر است. برتری این روش، سنتز تودههای زئولیتی خالص است. در این مقاله روش سنتز تودههای کروی TS-1 با استفاده از روش قالبگیری کلوییدی و رزین با قابلیت تبادل آنیونی ارائه شده است. قالبگیر آلی به کاربرده شده TPAOH بود و رزین IRA900 Clبه عنوان درشت قالبگیر مورد استفاده قرارگرفت. روشهای پراش پرتو-X (XRD)، طیفسنجی IR و میکروسکوپ نوری برای شناسایی نمونههای سنتز شده مورد استفاده قرار گرفتند.
for several recent years, syntheses of spherical zeolitic materials, such as S-1, ZSM-5 and Beta, have been reported using an anion exchange resin as macro-templates. Conceptually, these syntheses are based on the use of a colloidal crystal templating process. The advantage of this method is preparation of pure self-bonded zeolite micro/macrostructures.
In this paper the synthesis of TS-1 is reported using the colloidal crystal templating process. The organic template was TPAOH and the resin (IRA900 Cl) was used as a macrotemplate. Techniques such as X-ray powder diffraction (XRD), infrared spectroscopy (IR) and optical microscope, were used to characterize synthesized samples.
Macrostructure, Macrotemplate, Colloidal crystal templating Process, Titanium Silicalite-1.
درشت ساختار, غربال مولکولی, درشت قالبگیر, قالبگیری بلوری کلوییدی, تیتانیم سیلیکالات- 1.
11
21
http://ijcm.ir/browse.php?a_code=A-10-44-42&slc_lang=fa&sid=1
2017/06/72017/06/7
1396/3/17
2017/06/72017/06/7
1396/3/17
حمید رضا
آقابزرگ
0031947532846002516
0031947532846002516
Yes
دانشگاه آزاد اسلامی واحد تهران شمال
فتح الله
صالحی راد
0031947532846002517
0031947532846002517
No
پژوهشگاه صنعت نفت
راضیه
بنکدار سخی
0031947532846002518
0031947532846002518
No
آموزش و پرورش منطقهی قرچک.
fa
کاربرد فرایند مکانوشیمیایی در تهیه پودرهای بس ریز گارنت ایتریوم آهن با جانشانی بیسموت (12O5Fe2BiY)
The use of mechanochemical processing in
preparation of ultrafine Bi-substituted Yttrium Iron Garnet (Bi-YIG)
در این پژوهش پودرهای نانومتری گارنت ایتریوم- آهن با جانشانی بیسموت به کمک فرایند مکانوشیمیایی تهیه شد. در فرایند یاد شده بخشی از انرژی فعالسازی واکنش شیمیایی توسط آسیاب پر انرژی تأمین میشود. این امر موجب کاهش دمای تشکیل فاز و دستیابی به یک پودر تک فاز بس ریز میشود که مورد اخیر ناشی از محدود شدن رشد ذرات است. در این پژوهش بهترین دمای برشتن پس از 5 ساعت آسیابکاری درحدود °C 800 به دست آمد. این دما در مقایسه با دمای تشکیل فاز مورد نظر در روش متداول سرامیکی، پایینتر است. اندازه میانگین ذرات بااستفاده از (SEM) و نیز از روی الگوی پراش پرتو ایکس در گستره 50 تا 60 نانومتر تخمین زده شد. مغناطش اشباعی در دمای اتاق نمونهها با یک دستگاه مغناطشسنج ارتعاشی (VSM) اندازهگیری شد. مقادیر کوچکتر مغناطش اشباعی نمونههای تهیه شده نسبت به نمونههای ساخته شده به روش متداول سرامیکی بر اساس نظریه هسته-پوسته مورد بحث قرار گرفته است.
In this work we have prepared nano-sized Bi-YIG powders, using mechanochemical processing. In this process, a part of the activation energy, which is necessary for chemical reactions, is provided by high-energy mills. The as milled powders obtained by this technique need a lower annealing temperature in comparison with those obtained by conventional ceramic technique to become a single phase garnet. The lower temperature itself can produce ultrafine powders by inhibiting grain growth. The optimum calcining temperature was 800 oC for 5 hours milling time, which is much lower than 1000oC needed in conventional ceramic technique. Longer milling times are not recommended, because it produces extra iron into the powders. The average particle size of the powders was in the range 50 to 60 nm, using Scherrer’s formula. Room temperature saturation magnetizations of the samples were measured using a vibrating sample magnetometer (VSM). These were 0.022, 6, 17 and 20 emu/g for the samples annealed at 700, 725, 750 and 800 oC, respectively. The lower magnetization values respect to the conventional ceramic technique, are discussed according to core-shell model.
Mechanochemical processing, Nanoparticles, Substituted garnets, Calcining temperature, Saturation Magnetization
فرایند مکانوشیمیایی, ذرات نانومتری, گارنتهای جانشانی شده, دمای برشتن, مغناطش اشباعی.
23
30
http://ijcm.ir/browse.php?a_code=A-10-44-43&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/7
1396/3/17
احمد
حسن پور
0031947532846002519
0031947532846002519
Yes
دانشگاه اصفهان
جمشید
عمیقیان
0031947532846002520
0031947532846002520
No
دانشگاه اصفهان
مرتضی
مظفری
0031947532846002521
0031947532846002521
No
دانشگاه اصفهان
fa
تهیه فازهای مختلف سولفات کلسیم نیم آبه از گچ طبیعی معدن الموت و بررسی پارامترهای مؤثر بر سرعت سفت شدن آنها
Preparation of different phases of hemihydrate from Alamout natural gypsum and study of effective parameters on setting time.
در این کار پژوهشی فازهای α،β سو لفات کلسیم نیمه آبدار از ژیپس (گچ طبیعی معدن الموت) تهیه و شناسایی شدند. برای تشخیص فازهای مختلف نیمه آبدار از ژپس طیف سنجی فرو سرخ استفاده شد. دو فاز آلفا و بتا به روش پراش پودری پرتوایکس تشخیص داده شدند. سرعت سفت شدن فازها به صورت خالص و مخلوط به روش Vicat اندازهگیری شد. اثر افزودنیهای مختلف نظیر کلرید سدیم، سولفات سدیم و سولفات پتاسیم، بر سرعت سفت شدن فازها و مخلوط آنها، مورد بررسی قرار گرفت. از میان شتاب دهندهها، سولفات پتاسیم بیشترین اثر را نشان داد. میزان بهینه غلظت افزودنی شتاب دهنده نیز تعیین شد. این مقدار بهینه برابر 3 درصد بوده است. مقادیر کمتر و بیشتر از این مقدار اثر معکوس دارند.
In this research the α and β phases of hemihydrate have been prepared from Alamout natural gypsum and their setting times have been measured. The IR spectroscopy has been used for characterization of α and β phases of hemihydrate from gypsum. The α and β phases of hemihydrate distinguished from each other by X-ray powder diffraction (XRD). The setting times of pure α and β phases and mixtures of them have been measured by Vicat method. The effects of various additives such as accelerators (NaCl, K2SO4, Na2SO4) have been studied on setting time. Among them, potassium sulfate had maximum accelerating effect. Optimum concentration of the additive has been determined. This amount is %3 w/w. Less and more than this amount have inverse effects on setting time.
Gypsum, Hemihydrate, Phases, Preparation, Setting time, Additives.
ژیپس, نیمه آبدار, فازها, تهیه, زمان سفت شدن, افزودنیها.
31
38
http://ijcm.ir/browse.php?a_code=A-10-44-44&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/7
1396/3/17
شهریار
غمامی
0031947532846002522
0031947532846002522
Yes
دانشگاه بین المللی امام خمینی
مریم
طاهری
0031947532846002523
0031947532846002523
No
دانشگاه بین المللی امام خمینی
fa
کانیشناسی و سنگشناسی زینولیتهای کالک- سیلیکاته
Mineralogy and petrography of calc-silicate xenoliths
زینولیتهای کالک- سیلیکاته در باتولیت شیرکوه با مجموعه کانیهای ملیلیت، گارنت، وزوویانیت، ولاستونیت مشخص شدهاند. بررسی روابط پاراژنتیکی مجموعه کانیهایی فوق دو مرحله اساسی شکلگیری این کانیها را مشخص میکند: مرحله پیشرونده و مرحله پسرونده. حین مرحله دگرگونی پیشرونده که با اعمال ضربه گرمایی و واکنشهای کربنزایی در رخساره پیروکسن- هورنفلس همراه بوده است، ملیلیت، ولاستونیت و دیوپسید شکل گرفته است. شارههای آبدار تأخیری آزاد شده از باتولیت درحال تبلور، باعث شکلگیری کانیهای عمدتاً آبدار مرحله پسرونده شده است (رخساره هورنبلند- هورنفلس).
The calc-silicate xenoliths, within the Shir-Kuh batholith are characterized by melilite, garnet, vesuvianite, and wollastonite mineral assemblage. On the basis of paragenetic relations, prograde and retrograde metamorphism are involved in the formation of these minerals. Melilite, wollastonite and diopside formed during progressive metamorphism which was accompanied by thermal peak shocking and decarbonization reactions in pyroxene-hornfels faces. The effect of fluids in later stage, which released during crystallization of batholith, caused the formation of hydrous minerals (hornblende-hornfels facies during retrograding metamoephism.
Calc-Silicate, Melilite, Xenolith, Shir- Kuh
کالک- سیلیکاته, ملیلیت, زینولیت, شیرکوه.
39
50
http://ijcm.ir/browse.php?a_code=A-10-44-45&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
محمود
خلیلی
0031947532846002524
0031947532846002524
Yes
دانشگاه اصفهان
محمدعلی
مکیزاده
0031947532846002525
0031947532846002525
No
دانشگاه اصفهان
fa
تأثیر تغییر مشخصات مایع روزنهای بر خصوصیات فیزیکی و ریزساختاری بنتونیت
The effect of Variations in Pore Fluid Properties on the Physical and Micro-structural Characteristics of Bentonite
هدف اصلی این پژوهش، با توجه به اهمیت مشخصات ریزساختاری کانیشناختی و زیربافت در رفتار مهندسی خاکهای ریزدانه، بررسی تأثیر خصوصیات شیمیائی مایع روزنهای خاکهای رسی بر تغییر ریزساختار آن است. بدین منظور نخست با استفاده از مخلوط خاک بنتونیت و نمکهای سدیم با منشأ آنیونی متفاوت، مجموعهای از نمونههای مصنوعی خاک- الکترولیت به نسبت 1:50 تهیه و سپس با آزمایشهای فیزیکی و آزمایشهای SEM و XRD تغییر رفتار خاک بررسی میشود.
نتایج آزمایشهای فیزیکی نشان میدهد که، با افزایش غلظت الکترولیت، رفتار خاک از نظر تمایل به برهمکنش با آب کاملاً تغییر میکند. نتایج تصاویر SEM نیز نشان میدهد که با حضور کاتیون سدیم و در غلظتهای کم نمک، نخست ساختار خاک حالت پراکنده و با افزایش بیشتر غلظت نمک به لخته تبدیل میشود که ناشی از غلبه نیروهای جاذبه بر نیروهای دافعه بین سطوح رسی است. همچنین با تغییر مایع روزنهای بنتونیت، تغییرات عمدهای در موقعیت و شدت قله پراش پرتو X ایجاد میشود. بر این اساس، تغییرات ایجاد شده در رفتار مکانیکی را میتوان به تغییر نیروهای بین سطوح ذرات رسی در مقیاس ریز ساختاری نسبت داد.
Considering the importance of micro-structural characteristics of clayey soils on their behavior, the main objective of this research is to investigate the effect of pore fluid properties variations on clayey soils and their physical and micro-structural changes. For experimental purposes, soil-electrolyte solutions with the ratio of 1:50 prepared. A series of physical experiments, as well as, SEM and XRD experiments performed to investigate any variation on the soil behavior due to the changes in pore fluid properties. The results of the physical experiments indicate that, with increasing the electrolyte concentration, one will be faced with a change on the soil behavior including its interaction with water. The SEM pictures indicate that with the presence of sodium ions at low concentration, first soil takes a dispersive structure. With a further increase in salt concentration, and due to an increase in attractive forces in comparison with repulsive forces within clay particles, a flocculated structure forms. In addition to the above, during this process, a change will happen on the intensity and basal spacing of clay mineral. It is concluded that the main reason for a noticeable change in physical behavior of soil can be attributed mainly to the significant change in electrostatic forces of clay particles.
Micro-structural characteristics, Bentonite, Pore fluid, SEM, XRD.
خصوصیات ریزساختاری, بنتونیت, مایع روزنهای, SEM, XRD.
51
64
http://ijcm.ir/browse.php?a_code=A-10-44-46&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
وحیدرضا
اوحدی
0031947532846002526
0031947532846002526
Yes
دانشگاه بوعلی سینا
امیررضا
گودرزی
0031947532846002527
0031947532846002527
No
دانشگاه بوعلی سینا
fa
مطالعات کانیشناسی و ژئوشیمی توفیتهای زئولیتی شده منطقه دماوند ـ فیروزکوه (شرق تهران)
Mineralogical and Geochemical studies of Zeolitic tuffites in Damavand-Firuzkoh area, East of Tehran
بخش فوقانی سازند کرج در محدوده دماوند- فیروزکوه مطالعه شده است. بررسیهای صحرایی نشان میدهد که توفیتهای سبز سازند کرج در مناطق کیلان، حصاربن، و زریندشت به صورت نامنظم دگرسان و در طی این دگرسانی به زئولیت همراه با بنتونیت تبدیل شدهاند. مطالعات سنگشناسی نشان میدهد که بخش اعظم توفیتها در زمینه تیغههای شیشهای
(Glass Shard) تشکیل شده است، بهطوری که این تیغهها نیز از حاشیه دگرسان شدهاند. مطالعات میکروسکوپ الکترونی روبشی نیز تبدیل تیغههای شیشهای از حاشیه به زئولیت و کانیهای رسی را تأیید میکند. آزمایشات منحنیهای گرمایی TG)، (DTG وجود کانی زئولیتی کلینوپتیلولیت و ناخالصی کربنات را در توفیتهای شیشهای نشان میدهد. همچنین فازهای اصلی کلینوپتیلولیت، کریستوبالیت و فازهای فرعی مسکویت و مونت موریلونیت با آزمایشهای پراش پرتو X (XRD) در توفیتهای شیشهای شناسایی شدهاند. مطالعات ژئوشیمی انجام شده بر پایه دادههایICP و XRF ترکیب شیمیایی توفیتهای زئولیتی را داسیت تا ریوداسیت تأیید میکند که با ترکیب شیمیایی توفیتهای نادگرسان این منطقه تفاوتی ندارد. همچنین بر پایه این مطالعات ماگمای سازنده توفیتها از نوع کالکوآلکالن است. نمودارهای بهنجار شده نیز غنیشدگی از عناصر Th ,Ba ,Rb ,K را نشان میدهد که ویژگی ماگمای کمانها یا قوسهای آتشفشانی است.
This study focused on the upper parts of Karaj Formation in Damavand-Firuzkoh area. Field study indicated that the green tuffites of Karaj Formation in Kilan, Hesarbone, and Zarindasht irregularly altered and changed to zeolite and bentonite. Microscopic studies of zeolitic tuffites have shown that the main components of these tuffites are altered glass shards. The shards changed to zeolites from their margins. In addition to zeolite, clay minerals also changed to glass shards. Scanning Electron Microscopic studies confirmed the change of glass shard to zeolite and clay mineral from their margins. The presence of clinoptilolite and carbonate impurity in vitric altered tuffite are determined by thermal curves tests
(TG & DTG). Also, X-ray showed clinoptilolite, crystobalite as major mineral and muscovite, montmorillonite as minor mineral in these tuffites. On the base of XRF and ICP, chemical composition of these tuffites are in the range of acid to intermediate rocks compositions. Chemical composition of altered and unaltered tuffites is unique. Base on the petrological studies, the componential magma of the tuffites is calc alkaline. Spider diagrams indicated the enrichment of K, Ba, Th, Rb, which is characteristic of arc magmatism.
Tuffite, Zeolite, Firuzkoh, Clinoptilolite
توفیت, زئولیت, فیروزکوه, کلینوپتیلولیت.
65
76
http://ijcm.ir/browse.php?a_code=A-10-44-47&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
بتول
تقی پور
0031947532846002532
0031947532846002532
Yes
دانشگاه صنعتی اصفهان.
موسی
نقرهئیان
0031947532846002533
0031947532846002533
No
دانشگاه اصفهان.
محمدعلی
مکی زاده
0031947532846002534
0031947532846002534
No
دانشگاه اصفهان.
علی
قاسمی
0031947532846002535
0031947532846002535
No
دانشگاه صنعتی اصفهان.
fa
کانی شناسی فازهای مختلف تشکیل رودینگیت در دایک های مجموعه افیولیتی پروتروزوئیک بالایی شمال انارک
Mineralogy of different phases of Rodingite formation in dikes of Anarak upper Proterozoic Ophiolite
(NE of Isfahan province, Iran)
در شمال منطقه انارک در درون سنگهای افیولیتی پروتروزوئیک بالایی، رودینگیتها و سنگهای رودینگیتی به دو صورت تودهای و رگهای وجود دارند. در این مجموعه افیولیتی، دو نسل از رودینگیتهای رگهای را میتوان مشاهده کرد. رودینگیتهای تودهای یا استاتیک مربوط به زمان گسترش پوسته اقیانوسی و تشکیل افیولیت، رودینگیتهای رگهای یا دینامیک مربوط به زمان جایگیری افیولیت شمال انارک، یا فعالیتهای زمینساختی میباشند. کانیهای موجود در رودینگیتهای تودهای به ترتیب فراوانی عبارتند از: گارنت (آندرادیت کرمدار)، ایدوکراز، کلریت، دیوپسید، پرهنیت، و اپیدوت. در حالی که ترتیب فراوانی کانیهای موجود در رودینگیتهای رگهای نسل اول به صورت دیوپسید، کلریت، ایدوکراز، و گارنت (آندرادیت تیتان دار)، و در رودینگیتهای رگهای نسل دوم به صورت دیوپسید، کلریت، و گارنت (آندرادیت) است. بررسیهای سنگشناسی، و ژئوشیمی کانیها نشان میدهد که در زمان تشکیل رودینگیتهای تودهای، فعالیت یونهای کلسیم، آهن، و کرم، و در زمان تشکیل رودینگیتهای رگهای نسل اول فعالیت یونهای کلسیم، سیلیسیم، منیزیم، آلومینیوم، تیتانیوم، و OH- بالاتر بوده است. در مورد رودینگیتهای رگهای نسل دوم نیز میتوان گفت که شبیه رودینگیتهای رگهای نسل اول بوده و تنها به دلیل عدم وجود ایدوکراز، و نبود Ti در ساختار آندرادیت، فعالیت یونهای Ti ,Fe و Al نسبت به رودینگیتهای رگهای نسل اول کمتر است. به طور کلی رودینگیتهای تودهای نسبت به رودینگیتهای رگهای تنوع کانیشناسی بیشتری دارند.
In north of Anarak area, in the upper Proterozoic ophiolite, exist Massive and Vein type Rodingites. Vein type rodingites have formed in two phases. Massive or Static rodingites have formed during oceanic crust spreading and ophiolite formation, and Vein type or Dynamic rodingites have formed during Anarak ophiolite emplacement and tectonic activities. Abundance order of minerals in massive rodingites is Garnet (Chromian-Andradite), Idocrase, Chlorite, Diopside, Prehnite and Epidote (decreasing). In the first phase of vein type rodingites, the abundance order of minerals is Diopside, Chlorite, Idocrase, and Garnet (Ti-Andradite), and in the second phase is Diopside, Chlorite and Garnet (Andradite). Petrography and geochemical study of minerals show that, during the formation of massive type rodingites, the activity of Calcium, Iron, and Chromium ions in fluids, and during the formation of first phase of vein type rodingites, the activity of Calcium, Silicon, Magnesium, Aluminum, Titanium, and OH- ions in fluids, have been increased. Geochemistry of second phase of vein type rodingites is similar to first phase, but because of absence of Idocrase, and low Titanium in Andradite structure, the activity of Iron, Titanium, and Aluminum ions, is lower than first phase. Generally the diversity of minerals in massive type rodingites is more than vein type rodingites.
: Mineralogy, Geochemistry, Ophiolite, Serpentinized mantle peridotite, Dikes, Intrusives, Rodingites.
کانیشناسی, ژئوشیمی, افیولیت, پریدوتیتهای سرپانتینی شده, دایکها, تودههای نفوذی, رودینگیتها.
77
92
http://ijcm.ir/browse.php?a_code=A-10-44-48&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
قدرت
ترابی
0031947532846002536
0031947532846002536
Yes
دانشگاه تربیت مدرس
مسیب
سبزهیی
0031947532846002537
0031947532846002537
No
دانشگاه تربیت مدرس
شوجی
آرایی
0031947532846002538
0031947532846002538
No
دانشگاه کانازاوا،
احمد
حسن احمد
0031947532846002539
0031947532846002539
No
دانشگاه کانازاوا،
محمد هاشم
امامی
0031947532846002540
0031947532846002540
No
مرکز تحقیقات و توسعه متالوژی
محمد
محجل
0031947532846002541
0031947532846002541
No
سازمان زمین شناسی و اکتشافات معدنی کشور.
fa
بررسی آثار فرآیند گرمایشی گرما مغناطیسی بر ریزساختار و سرشتهای مغناطیسی آلیاژ Alnico 5DG
Effects of Thermo-magnetic Heat Treatment on Microstructure and Magnetic Properties
of Alnico 5DG Alloy
In this research, Alnico 5DG alloy was melt and cast in the optimum conditions and its samples were homogenised and heat treated in a magnetic field in order to obtain the required magnetic properties. Microstructure, phase composition and magnetic properties of samples were examined in every processing step. The results indicated that the properties of samples were highly influenced by processing parameters. A proper microstructure composed of a1 magnetic phase in a texture of a2 with acceptable magnetic properties was obtained by meticulous control of the processing conditions. The results also revealed that the magnetic coercivity (and remanence) of the cast samples should be increased by an appropriate heat treatment from 12 kA/m (and 0.55 T) to 41.6 kA/m (and 1.3 T), respectively.
Magnetic materials, Directional solidification, Alnico 5DG, Phase composition
در این بررسی آلیاژ آلنیکو 5DG در شرایط بهینه, ذوب و ریختهگری شده و سپس نمونههایی از آن برای اصلاح ساختار و دریافت سرشتهای مغناطیسی مطلوب تحت اثر فرآیند گرمایی همگنسازی و گرما مغناطیسی قرار گرفتند. در هر مرحله ساختار میکروسکوپی, ترکیب فازی و خواص مغناطیسی نمونهها مورد ارزیابی قرار گرفت. نتایج حاکی از آنست که خواص ذکرشده تا حد زیادی تابع شرایط فرایند ساخت بوده و تنها با کنترل دقیق آنها میتوان به ریزساختار مطلوب متشکل از فاز مغناطیسی 1 در زمینه 2 با خواص مغناطیسی قابل قبول دست یافت. نتایج نشان میدهند که پس از فرآیند گرایی بهینه بر نمونه ریختهگری شده, نیروی وادارندگی مغناطیسی از KA/m 12 به KA/m 6/41 و پسماند مغناطیسی از T 55/0 به T 32/1 افزایش مییابد.
93
103
http://ijcm.ir/browse.php?a_code=A-10-44-49&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/7
1396/3/17
خانعلی
نکوئی
0031947532846002542
0031947532846002542
Yes
دانشگاه تهران
سعید
، حشمتیمنش
0031947532846002543
0031947532846002543
No
دانشگاه تهران
، حشمتیمنش
طعطایی
0031947532846002544
0031947532846002544
No
دانشگاه تهران
fa
کیانیت در هالههای دگرگونی
Kyanite in thermal aureoles
مدلهای مختلفی جهت تفسیر علت حضور کیانیت در فاز پایداری در هالههای دگرگونی مجاورتی بخصوص آنهایی که دارای سایر انواع سیلیکاتهای آلومینیوم نظیر آندالوزیت و سیلیمانیت یا فیبرولیت هستند ارائه شدهاست. تبلور متوالی کیانیت←آندالوزیت←سیلیمانیت در چنین هالههایی را میتوان به افزایش درجه حرارت در فشار ثابت (پایین تر از نقطه سه گانه سیستم 5SiO2Al) نسبت داد. تبلور متوالی کیانیت←سیلیمانیت (فیبرولیت) میتواند حاصل افزایش درجه حرارت در فشار ثابت (بالاتر از نقطه سه گانه سیستم 5SiO2Al) باشد. تشکیل کیانیت را میتوان حاصل شکسته شدن کانی پیروفیلیت یا به احتمال بیشتر مجموعه کلریت بعلاوه مسکویت دانست. عدم حضور کیانیت در برخی از هالههای دگرگونی را میتوان به عدم وجود ترکیب شیمیایی مناسب در سنگهای مادر یا افزایش نرخ سریع درجه حرارت و در نتیجه اوراستپینگ واکنشهای تشکیل دهنده کیانیت نسبت داد.
Different models are discussed to interpret the presence of kyanite as a stable phase in contact aureoles especially in the andalusite-, sillimanite-bearing aureoles. In such aureoles the polymorphic sequence kyanite → andalusite → sillimanite can be explained in terms of an essentially isobaric path during which kyanite initially crystallises from the breakdown of pyrophyllite or more likely muscovite + chlorite beneath the pressure of the triple point (3-4 kbar 10-14 km depth), followed by andalusite and sillimanite crystallisation. The sequence kyanite-sillimanite and/or fibrolite can be seen in thermal aureoles subjected to isobaric metamorphism above the triple Al2SiO5 point (5-8 kbar 17-28 km depth). The absence of kyanite in some thermal aureoles can be explained on the basis of either compositional constraint or overstepping of low-temperature reactions due to high heating rates.
Kyanite, Aluminium silicates, contact aureole
کیانیت, آلومینیوم سیلیکات, هاله دگرگونی.
105
128
http://ijcm.ir/browse.php?a_code=A-10-44-50&slc_lang=fa&sid=1
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/10
1396/3/20
2017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/72017/06/10
1396/3/20
سید مسعود
همام
0031947532846002569
0031947532846002569
Yes
دانشگاه علوم پایه
مایکل
پی آترتون
0031947532846002570
0031947532846002570
No
لیورپول
آلن
پی بویل
0031947532846002571
0031947532846002571
No
لیورپول