@article{ author = {}, title = {Petrography, and mineralogical and geochemical control on distribution of major, minor, and trace elements in bauxitic-lateritic deposit of the NE Malekan, East-Azarbaidjan Province, NW Iran}, abstract ={The bauxitic-lateritic deposit at northeast of Malekan (East-Azarbaidjan Province, NW Iran) occurred as interlayer horizon within the Ruteh carbonate formation (Middle-Upper Permian). Based on compositional values of major elements, this deposit is divided into four discrete lithologic facies including, (1) laterite, (2) ferruginous bauxite, (3) bauxitic clay, and (4) siliceous bauxite. Petrographically, the ores display pelitomorphic, micro-granular, nodular, pseudo-breccia, colloform, spongy, and collomorphic-fluidal textures which are indicative of an authigenic origin. According to field evidence and geochemical data, the basaltic rocks whose remnants still exist in places adjacent to the lower contact within the carbonate bedrocks are most likely to be the protolith of this deposit. Textural and geochemical studies indicate that besides volume reduction of the protolith and physico-chemical variations (e.g., pH and Eh) within depositional environment during weathering processes, factors such as the availability of the complexing ligands, heterogeneity of the protolith, adsorption, function of carbonate bedrock as geochemical barrier, contemporaneous deposition of elements, existing in the resistant mineral phases, indirect bauxitization, morphological and hydro-dynamical conditions, and finally formation in a passive and undisturbed aqueous environment played important roles in the formation of the bauxitic-lateritic ores in northeast of Malekan.  Correlation coefficients among the elements indicate that trace elements within the ores were fixed by boehmite, diaspore, rutile, anatase, zircon, muscovite, Mn-oxides, and xenotime.}, Keywords = {Malekan, bauxitization, mineralogical control, fixation of elements, petrography}, volume = {20}, Number = {4}, pages = {89-100}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {سنگ نگاری و کنترل کانیایی و زمین‌شیمیایی روی توزیع عناصر اصلی، فرعی، و جزئی در نهشته بوکسیتی- لاتریتی شمال شرق ملکان، استان آذربایجان شرقی، شمال باختری ایران}, abstract_fa ={نهشته­ بوکسیتی- لاتریتی در شمال خاور ملکان (استان آذربایجان شرقی، شمال غرب ایران) به صورت افق بین لایه­ای در تشکیلات کربناتی سازند روته (پرمین میانی- بالایی) پدید آمده است. بر اساس مقادیر ترکیب عناصر اصلی در کانسنگ­ها، این نهشته­ به رخساره سنگی مشخص، (1) لاتریت، (2) بوکسیت آهن­دار، (3) رس بوکسیتی و (4) بوکسیت سیلیسی تقسیم می­شود. از نظر سنگ نگاری، کانسنگ­ها بافت­های پلیتومورفیک، میکروگرانولار، نودولار، برشی دروغین، کلوفرم، اسفنجی، وکلومورفی- جریانی را نشان می­دهند که دال بر یک منشاء برجازا هستند. بر اساس شواهد صحرایی و داده­های زمین­شیمیایی، سنگ­های بازالتی که هنوز بقایایی از آنها در محل کنتاکت با سنگ­های بستر کربناتی وجود دارد، محتمل­ترین پروتولیت این نهشته­ می­باشند. مطالعات بافتی و زمین­شیمیایی نشان می­دهند که علاوه بر کاهش حجم پروتولیت و تغییرات فیزیکوشیمیایی (pH و Eh) محیط نهشت در طی فرایندهای هوازدگی، عواملی چون میزان دسترسی به لیگندهای کمپلکس­ساز، ناهمگنی پروتولیت، جذب سطحی، عملکرد سنگ­ بستر کربناتی به عنوان سد زمین­شیمیایی، رسوبگذاری همزمان عناصر، حضور در فازهای کانیایی مقاوم، بوکسیتی شدن غیر مستقیم، شرایط مورفودینامیکی و هیدرودینامیکی، در نهایت تشکیل در یک محیط آبی آرام و غیر آشفته نقش بارزی در توسعه کانسنگ­های بوکسیتی- لاتریتی در شمال شرق ملکان ایفا نموده­اند. ضرایب همبستگی بین عناصر نشان می­دهند که عناصر جزئی در کانسنگ­ها توسط بوهمیت، دیاسپور، روتیل، آناتاز، زیرکن، موسکویت، اکسیدهای منگنز، و زینوتایم تثبیت شده­اند.  }, keywords_fa = {ملکان؛ بوکسیتی شدن؛ کنترل کانیایی؛ تثبیت عناصر؛ سنگ نگاری.}, url = {http://ijcm.ir/article-1-355-en.html}, eprint = {http://ijcm.ir/article-1-355-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Study on influence of cooling processing of melting polypropylene and electron beam (10 MeV) on the change of their crystallinity}, abstract ={In this research, the effects of cooling rate and high energy electron beam irradiation on the change of crystallinity of polypropylene was investigated. For this work, samples of polypropylene heated to 230 ºC and then rapidly cooled with different speed of cooling. Crystalliny of samples were determined by differential scanning calorimetry and infrared spectroscopy. It was shown that percentage of crystallinity depends on the cooling rate; therefore in higher cooling rate will be less crystallinity. Effect of electron beam on the samples that cooled in air by applying different radiation doses in 5-40 kGy was investigated. Gel content of each sample that shows the amount of chain crosslink between the transverse area Amorphous by using Xylene and percentage of crystallinity determined by using of DSC, FTIR and XRD spectra. The effect of radiation dose on crystallinity of samples revealed that the amount of crystallinity increases by increasing dose to about 30 kGy then decreases with increasing radiation dose.}, Keywords = {Polypropylene, electron irradiation, cooling rate, crystallinity, DSC, FTIR, XRD. }, volume = {20}, Number = {4}, pages = {613-622}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {بررسی فرایند سردشدن پلی‌پروپیلن گداخته، و اثر تابش پرتو الکترونی پر انرژی (MeV 10) بر تغییر بلورینگی آن}, abstract_fa ={در این کار پژوهشی به بررسی تأثیر دو عامل، یکی سرعت­های متفاوت سردشدن و دیگری تابش پرتو پرانرژی الکترونی روی تغییر بلورینگی پلی­پروپیلن ساخت ایران پرداخته شده است. برای این کار نمونه­های پلی­پروپیلن را در قالبی تا دمای  230 ذوب کرده، سپس با سرعت­های متفاوت سرد شدند. درصد بلورینگی نمونه­ها با استفاده از گرماسنجی روبشی تفاضلی، طیف­سنجی فروسرخ و نیز پراش پرتو ایکس تعیین شد. نتیجه­ای که به دست آمد این بود که درصد بلورینگی نمونه­ها به سرعت سرد شدن آن­ها بستگی دارد به­طوری­که هرچه سرعت سرد شدن بیشتر باشد درصد بلورینگی کمتر خواهد شد. اثر تابش الکترون روی نمونه­ی سرد شده در هوا نیز با دز تابشی متفاوت از  kGy40-5 مورد بررسی قرار گرفت. تأثیر دز تابش روی بلورینگی نمونه­ها به این صورت بود که مقدار بلورینگی با افزایش دز تا حدود   kGy30 افزایش سپس با افزایش دز تابش، مقدار بلورینگی کاهش می­یابد. محتوای ژل هر نمونه که میزان پیوند عرضی بین زنجیره­ی آن را در ناحیه آمورف نشان می­دهد که با استفاده از حلال زایلن به دست آمد. درصد بلورینگی آن­ها نیز با استفاده از دما نگاشت، DSC و طیف­سنج FTIR و نیز پراش پرتو ایکس تعیین شد.}, keywords_fa = { پلی‌پروپیلن؛ پرتو الکترونی؛ سرعت سرد شدن؛ بلورینگی؛ گرماسنجی روبشی تفاضلی؛ طیف سنجی فروسرخ؛ پراش پرتو ایکس.}, url = {http://ijcm.ir/article-1-342-en.html}, eprint = {http://ijcm.ir/article-1-342-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {The investigation of skarn mineralization at Alam-Kuh in Kelardasht area (North of Iran) with special view on fluid inclusions studies}, abstract ={The widespread stratigraphic sequences, from Precambrian to Cenozoic have been affected by metasomatic and thermal- metamorphic events of the Pliocene age by the Alam- Kuh alkali-granitic intrusion. Skarnification is the main metasomatic type in the studied area with 1-2km in extent. This intruded alkali-granite is probably related to syn-collision and post collision tectonic regimes as A-type granite. Intrusion of alkali-granitic rocks into the surrounded wall rocks caused to form the skarn zones and oxide-sulfide mineralization, mainly consists of magnetite and some chalcopyrite as well as pyrite. The fluid inclusion studies show five types of inclusions in quartz synchronous with mineralization as V + L + S, V + L, L + V, L, and V. Geothermometric evidences indicate temperatures of 478°C- 488°C and 368°C- 378°C for oxide phase formation and sulfide mineralization respectively. Magmatic and meteoric fluids mixing are effective in generation of fluids during mineralization processes. The field geology evidences, microscopic and geothermometery characteristics suggest a skarn origin for the metallic mineralization of the Alam- Kuh intrusive body.}, Keywords = {skarn, Iran, mineralization, fluid inclusions, thermometry, Alam-Kuh}, volume = {20}, Number = {4}, pages = {623-636}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {بررسی کانی‌سازی اسکارن علم‌کوه در منطقه‌ی کلاردشت (شمال ایران) با تأکید بر بررسی‌های میانبارهای شاری}, abstract_fa ={توده­ی نفوذی گرانیت قلیایی علم­کوه با سن وابسته به پلیوسن در کلاردشت چالوس (شمال ایران) دنباله­ی چینه­ای گسترده­ای از پرکامبرین تا سنوزوئیک را تحت تأثیر دگرگونی گرمایی و دگرنهادی خویش قرار داده است. دگرنهادی اسکارنی مهم­ترین نوع دگرنهادی در منطقه­ی مورد بررسی است که گسترش هاله­های دگرگونی آن به پهنای یک تا دو کیلومتر است. این گرانیت قلیایی به احتمال در شرایط زمین­ساختی همزمان و پس از کوهزایی تشکیل شده و در گروه گرانیت­های نوع A قرار می­گیرد. نفوذ توده­ی گرانیتی علم­کوه در سنگ­های درونگیر منطقه ضمن گسترش زون­های اسکارنی باعث کانی­سازی اکسیدی و سولفیدی در منطقه شد که بیشتر از مگنتیت، کالکوپیریت و پیریت تشکیل شده است. بررسی میانبارهای شاری نشانگر وجود پنج نوع میانبار V + L + S، V + L، L + V، L و V در کوارتزهای همزمان با کانی­سازی است. شواهد زمین­-دما سنجی بیانگر تشکیل فاز اکسیدی در گستره­ی دمایی C° 478 تا C° 488 و فاز سولفیدی در گستره­ی دمایی C° 368 تا C° 378 است. اختلاط شاره­های ماگمایی و آب­های جوی در تولید شاره­های کانه­ساز فرآیند مهمی بوده است. مشاهدات صحرایی، میکروسکوپی و دماسنجی مؤید زایش اسکارنی کانی­سازی­های فلزی موجود در حاشیه­ی توده نفوذی علم­کوه است.}, keywords_fa = {اسکارن؛ ایران؛ کانی‌سازی؛ میانبارهای شاری؛ دماسنجی؛ توده‌ی نفوذی؛ علم‌کوه.}, url = {http://ijcm.ir/article-1-343-en.html}, eprint = {http://ijcm.ir/article-1-343-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {The study of zoning in the pegmatite of Ebrahim Attar area and the chemistry of their minerals (Southeast of Kurdistan)}, abstract ={The study area is located northwest of Iran (38 km SW of Qorveh); which is a part of Sanandaj-Sirjan Zone. The lithology of this pegmatite complex varies from pegmatitic syenogranite to granodiorite, which were intruded in the dolomitic marbels of the area. Field observation, thin sections studies, XRD, XRF and ICP analyses on minerals and rocks in the area show that the composition of these pegmatites vary from the rim to the center. In the center of the pegmatitic dyke, the grains are coarser and concentrations of quartz and feldspar increase, while the mica decreases. The geochemical study on the minerals indicate high amount of Ta (92-93.5 ppm), Tl (9 ppm), Ti (5275 ppm), Zn (668-724 ppm), Ag (29-33 ppm) and Nb (1620-1710 ppm) in biotites and Ga (212-214 ppm), W (33-40 ppm) and Sn (85-87 ppm) in muscovites. Also garnets which exist in pegmatites are almandine-spessartine enriched in Y (1120-1150 ppm) and the amount of HREE/LREE elements in these garnets is high. In the analyzed beryls the amount of Ni (15-17 ppm), V (9-12 ppm), Cu (22-29 ppm) and Cs (108-123 ppm) elements is high}, Keywords = {Pegmatite, zoning, Ebrahim Attar, Kurdistan. }, volume = {20}, Number = {4}, pages = {637-650}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {بررسی منطقه‌بندی پگماتیت‌های منطقه‌ی ابراهیم عطار و شیمی کانی‌های تشکیل دهنده‌ی آن‌ها (جنوب شرقی کردستان)}, abstract_fa ={منطقه­ی مورد بررسی در شمال غربی ایران (38 کیلومتری جنوب غربی شهرستان قروه) واقع شده است که در تقسیمات زمین­شناسی بخشی  از زون سنندج- سیرجان به حساب می­آید. لیتولوژی مجموعه­ی پگماتیتی مورد نظر از سینو گرانیت تا گرانودیوریت پگماتیتی متغیر است، که در مرمرهای دولومیتی منطقه نفوذ کرده­اند. مشاهدات صحرایی، بررسی مقاطع نازک و آزمایش­های انجام شده به روش­های XRD، XRF وICP  روی کانی­ها و سنگ­های منطقه، نشان می­دهد که ترکیب این پگماتیت­ها از حاشیه به مرکز تغییر می­کند. هر چه به مرکز این دایک­های پگماتیتی نزدیک می­شویم دانه بندی درشت­تر و تمرکز کوارتز و فلدسپات بیشتر می­شود در عوض از تمرکز میکا کاسته می­شود. بررسی­های ژئوشیمیایی صورت گرفته روی کانی­ها حاکی  از مقدار  بالای (ppm 5/93-92) Ta، ( ppm9) Tl، ( ppm5275) Ti، (ppm 724-668) Zn، (ppm 33-29) Ag و (ppm 1410-1380) Nb در بیوتیت­ها و (ppm 214-212) Ga، (ppm 40-33) W و (ppm 87-85) Sn در موسکوویت­هاست. همچنین گارنت­های موجود در پگماتیت­ها که از نوع آلماندین- اسپسارتین هستند، نسبت به (ppm 1150-1120) Y غنی شدگی نشان می­دهند، مقدار عناصر HREE/LREEنیز در این گارنت­ها بالا است. در بریل­های آنالیز شده نیز مقدار عناصر (ppm 17-15) Ni، (ppm 12-9) V، (ppm 29-22) Cu و (ppm 123-108)  Csبالا است.}, keywords_fa = {پگماتیت؛ زون‌بندی؛ ابراهیم عطار؛ کردستان.}, url = {http://ijcm.ir/article-1-344-en.html}, eprint = {http://ijcm.ir/article-1-344-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {The role of fractional crystallization and crustal contamination in the magmatic evolution of Paleogene volcanic rocks of Damash area in Guilan Province}, abstract ={The Paleogene volcanic rocks of Damash have a considerable outcrops in Alborz structural zone in Guilan Province. These volcanic rocks show a compositional range from olivine basalt, basaltic andesite, pyroxene andesite to andesite. The petrographical and geochemical studies indicate that the fractional crystallization of clinopyroxene and olivine play an important role in lithological varieties of the Damash volcanic rocks. The positive correlation of Hf and Nb v.s Zr, CaO/Al2O3 v.s MgO and Al2O3/CaO v.s SiO2 are geochemical signatures of differentiation of clinopyroxene and olivine. The depletion in elements such as Nb, Ta, Zr, Hf, P, Ti and high ratios of Ba/Nb, La/Nb and Rb/Y, and low ratios of Zr/Nb and Y/Nb are geochemical evidences of crustal contamination of these volcanic rocks.The range of the incompatible elements and comparison with the crustal data range show that these volcanic rocks have a clear elemental equilibrium with continental crust and have been contaminated with it.}, Keywords = {Volcanic rocks, fractional crystallization, crustal contamination, Damash, Guilan.}, volume = {20}, Number = {4}, pages = {651-662}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {بررسی نقش جدایش بلورین و آلایش پوسته‌ای در شکل‌گیری ماگمایی سنگ‌های آتشفشانی پالئوژن داماش گیلان}, abstract_fa ={سنگ­های آتشفشانی داماش به سن پالئوژن در زون ساختاری البرز واقع در استان گیلان برونزد قابل توجهی دارند. این سنگ­ها تنوع ترکیبی بین اولیوین بازالت، آندزیت بازالتی، پیروکسن آندزیت و آندزیت نشان می­دهند. بررسی­های سنگ­شناختی و ژئوشیمیایی حکایت از آن دارد که جدایش کانی­های کلینوپیروکسن و اولیوین عامل اصلی تنوع سنگ­های آتشفشانی داماش است. همبستگی مثبت Hf و Nb در برابر Zr و CaO/Al2O3 در برابر MgO و Al2O3/CaO در برابر SiO2 از نشانه­های ژئوشیمیایی جدایش بلورین کانی­های کلینوپیروکسن و اولیوین هستند. فقر در عناصری چون Hf, Zr, P, Ti, Ta, Nb و نسبت­های بالای La/Nb, Ba/Nb و Rb/Y و محتوای پایین Y/Nb و Zr/Nb نشان از آلایش پوسته­ای این سنگ­ها دارد. بررسی روند الگوی عناصر ناسازگار و مقایسه آنها با مقادیر پوسته­ای نشان می­دهد که این سنگ­ها دارای تعادل عنصری شاخصی با سنگ­های پوسته­ی قاره­ای بوده و با آنها آلایش یافته­اند.}, keywords_fa = {سنگ‌های آتشفشانی؛ جدایش بلورین؛ آلایش پوسته‌ای؛ داماش؛ گیلان.}, url = {http://ijcm.ir/article-1-345-en.html}, eprint = {http://ijcm.ir/article-1-345-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {The geochemistry, mineralization and tectonic studies in SouthWest of Keriz (Kashmar)}, abstract ={The study area is located about 30km northwest of Kashmar, southwest of Keriz village and east of Siah Kuh mine. Based on field and mineralogical studies, the rocks are mainly polutonic, sub-volcanic and volcanic, aged Eocene. The carbonate unit, with Permian age, is exposed extensivelly in the area. The mineralization in the area appears as veins, lenses, massive and dissiminated forms. Vein and lens type mineralization are related to the fault zones. The main mineralization in the area is magnetite, which occurs mostly as veins, lenses and massive. Dissiminated forms are less abundant. Other mineral veins and lenses in the area are specularite, chalcopyrite, pyrite, hematite, malachite, quartz and carbonate. Weathering of hypogen sulfide minerals has generated huge surficial amounts of secondry minerals such of malachite. Tectonically, there are three types of fault in the area: normal, strike slip and thrust, trending mainly northwest-southeast. The vein mineralization- trend is the same as fault- trend. The strike slip faults have been responsible mostly in providing suitable spaces for the uplift and porefluid filling. The magnetite has formed hydrothermally in contact with limestone and intrusive bodies. The existence of copper positive anomalies, I type granitoides, as well as fault mineralization may be considered as an evidence to prove that the iron oxide deposit in the area is a member of Fe-oxide type.}, Keywords = {keriz, magnetite, hydrothermal, strike slip faults. }, volume = {20}, Number = {4}, pages = {663-676}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {بررسی‌های ژئوشیمی، کانی‌سازی و زمین‌ساختی جنوب‌غربی کریز (کاشمر)}, abstract_fa ={منطقه­ی مورد بررسی در 30 کیلومتری شمال­غربی شهرستان کاشمر، جنوب­غربی روستای کریز و در شرق معدن آهن سیاه کوه قرار گرفته است. براساس بررسی­های صحرایی و کانی­شناسی صورت گرفته، بیشتر سنگ­ها را واحدهای عمیق، واحدهای نیمه­عمیق و واحدهای آتشفشانی با سن ائوسن تشکیل می­دهندکه واحد کربناتی با سن پرمین نیز در منطقه به­طور گسترده رخنمون دارد.کانی­سازی در منطقه به شکل رگه­ای، عدسی، توده­ای و افشان مشاهده می­شود. کانی­سازی رگه­ای و عدسی در ارتباط با زون گسلی می­باشد. اغلب کانی­سازی در منطقه مگنتیت است که بیشتر به اشکال رگه­ای، عدسی توده­ای و کمتر به صورت افشان است.کانی­های دیگر که به مقدار کمتری به صورت رگه­ای و عدسی در منطقه مشاهده می­شوند شامل اسپکیولاریت، کالکوپیریت، پیریت، هماتیت، مالاکیت، کوارتزوکربناتند. هوازدگی کانی­های سولفیدی اولیه سبب تشکیل مقادیر سطحی از کانی­های ثانویه مانند مالاکیت شده است. از نظر زمین­ساختی، منطقه حاوی سه نوع گسل از جمله گسل نرمال، گسل راستالغز و گسل تراستی است که روند اصلی گسل­ها شمال­غربی – جنوب­شرقی است. روند این گسل­ها با روند کانی­سازی رگه­ای همخوانی دارد. گسل­های راستالغز در کانی­سازی نقش موثری داشته و عملکرد این گسل­ها منجر به ایجاد فضاهای مناسب برای بالا آمدن آبگون و پر کردن فضاها شده است.مگنتیت در سنگ آهک و در تماس با توده­های نفوذی - آهک به­صورت گرمابی تشکیل شده است. وجود اکسید آهن فراوان از نوع مگنتیت، سنگ­های گرانیتوئیدی نوع I، به صورت بی­هنجاری مثبت مس و ارتباط کانی سازی با موقعیت گسل ها می­تواند شواهدی در تایید پیدایش کانسار سنگ آهن  منطقه به عنوان عضوی از ذخایر نوع Fe-Oxide ­باشد.}, keywords_fa = { کریز؛ مگنتیت؛ گرماب؛گسل‌های راستالغز.}, url = {http://ijcm.ir/article-1-346-en.html}, eprint = {http://ijcm.ir/article-1-346-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Segregation of bentonite components in order to achieve nano montmorillonite}, abstract ={Nano technology makes the possibility to achieve specific properties for materials. In this process, by reducing the size of materials in the range of nano size, new noticeable behaviour for material can be observed. Such behaviour cannot be observed for larger particles from that material. Bentonite soils contain more than 76% montmorillonite and some other minerals. Pure montmorillonite with nano size has a vast industrial application in which its production is relatively costly and time consuming.  This research is aimed to propose a method for segregation of bentonite components to reach nano montmorillonite. To achieve this objective, a mechanical method is proposed. Based on this method, a nano montmorillonite with micro and nano size is achieved. The segregation process is monitored with PSA, XRD, SSA and SEM experiments. The results of this research show that a nano montmorillonite with SSA of 522.58 m2/g and average diameter of 6.13 micron is attained. The achieved nano montmorillonite has larger purity in comparison to Cloisite Na+. In addition, it has lower average particle size than Cloisite Na+.  Furthermore, according to the results of this research the extracted nano clay is free from carbonate and quartz particles. The SSA of this nano montmorillonite was 25% more than that of bentonite. The proposed method is relatively inexpensive. Moreover, since no chemical is used in its production process, it is a suitable sample for practical, research, and industrial projects.}, Keywords = {Nano-clay, bentonite, montmorillonite, Cloisite Na+, XRD, SEM, SSA. }, volume = {20}, Number = {4}, pages = {677-684}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {جداسازی اجزای بنتونیت به منظور دستیابی به نانو مونت‌موریلونیت}, abstract_fa ={با استفاده از فناوری نانو، امکان دستیابی به ویژگی­هایی از مواد فراهم می­شود، به­طوری­که این ویژگی­ها در مواد با ابعاد بزرگتر قابل مشاهده نیستند. رسهای بنتونیتی به­طور گسترده از کانی رسی مونتموریلونیت (بیش از 76%) و مقدار کمتری از کانیهای دیگر تشکیل شده­اند. مونت­موریلونیت خالص با ابعاد نانو دارای کاربردهای صنعتی متنوعی است که تهیه آن نیز عموماً پرهزینه و زمان ­بر است. این پژوهش با هدف ارائه روشی برای جداسازی بخشی با ابعاد نانوی مونت­موریلونیت از بنتونیت انجام شده­است. روند جداسازی اجزا از طریق آزمایش­های تعیین اندازه­ی ذرات به روش لیزری (PSA)، پراش پرتو ایکس (XRD)، تعیین سطح ویژه (SSA) و بررسی تصاویر میکروسکوپ الکترونی پویشی (SEM) در هر مرحله آنالیز شدند. از مهمترین نتایج این پژوهش می­توان به دستیابی به نانوذرات رسی با سطح ویژه­ی (m2/g) 522.58 و میانگین قطر 6.13 میکرومتر اشاره کرد. نانوذرات تولیدی در این روش از درجه­ی خلوص مناسبی برخوردار بوده به­طوری­که با توجه به نتایج آزمایش­های ریزساختاری XRD، SEM و PSA، نمونه­ی نانو مونت­موریلونیت به­دست آمده نسبت به نمونه نانو مونت­موریلونیت صنعتی کلوزایت+Na دارای خلوص بیشتر و میانگین قطر ذرات کوچکتری است. همچنین نتایج این پژوهش نشان می­دهد که نمونه­ی نانورس استخراج شده فاقد کربنات و کوارتز است و سطح مخصوص آن حدود 25% نسبت به بنتونیت افزایش یافته­است. روش پیشنهادی برای استخراج نانو مونت­موریلونیت از بنتونیت به واسطه­ی کم هزینه بودن و نیز به­دلیل عدم استفاده از مواد شیمیائی در مراحل خالص­سازی، نمونه مناسبی برای کاربردهای اجرائی و پژوهشی بوده و امکان استفاده از این نانو رس را در بخش­های مختلف صنعت فراهم می­کند.}, keywords_fa = { نانورس؛ بنتونیت؛ مونت‌موریلونیت؛ کلوزایت+Na؛ XRD؛ SEM؛ SSA.}, url = {http://ijcm.ir/article-1-347-en.html}, eprint = {http://ijcm.ir/article-1-347-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Petrogenesis and geothermobarometry of mafic and ultramafic igneous rocks in ophiolitic complex of Eastern Birjand}, abstract ={The mafic and ultramafic igneous rocks of the ophiolitic complex in eastern Birjand) between Sulabest in southern part to north of Gazik in northern part) Have been studied. According to plot of data on diagrams and the result of mineralogy and geochemistry, gabbros and some peridotites belong to cummulate series of spreading sea floor magma (MORB) where some peridotites are of metamorphic (tectonics) types. Magmatic series of igneous rocks are tholeiitic. Trace elemental patterns similarities on spider diagrams also confirming the relations of these rocks to Mg-rich basaltic magma of MORB type. Geothermobarometry results of some rocks, based on different calibrations, show temperatures of 944˚C for gabbros to 1294˚C for peridotites. Temperature pressure calculations based on Holland and Powell thermocalc method, indicate, rocks crystallization conditions of 748˚C and 17.46 Kb for gabbros to 1282˚C and 24.7 -33.6Kb for peridotites. Most obtained temperatures, particularly the thermocalc ones, for crystallization conditions of these rocks from an initial Mg-rich magma, MORB type, in spreading sea floor seems to be reasonable.}, Keywords = {Ophiolitic complex, mafic and ultramafic igneous rocks, cummulate series, geothermobarometry, Birjand.}, volume = {20}, Number = {4}, pages = {685-700}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {پتروژنز و دما- فشار سنجی سنگ‌های آذرین مافیک و اولترامافیک در مجموعه‌ی افیولیتی شرق بیرجند}, abstract_fa ={سنگ­های آذرین مافیک و اولترامافیک مورد بررسی، به یک مجموعه­ی افیولیتی وابسته­اند که در شرق بیرجند (بین سولابست در جنوب تا شمال گزیک در شمال) واقع شده است. نتایج نمودارهای کانی­شناسی و ژئوشیمیایی نشان می­دهد که گابروها و تعدادی از پریدوتیت­ها به سری انباشتی ماگمای مورب زون گسترش یافته­ی کف اقیانوس وابستگی دارند و تعدادی دیگر نیز از انواع دگرگون (تکتونیت­ها) هستند. سری ماگمایی سنگ­های آذرین مورد بررسی بر اساس نمودارهای ژئوشیمیایی تولئیتی است. مشابهت الگوهای عناصر کمیاب در نمودارهای عنکبوتی نیز وابستگی این سنگ­ها را به ماگمای بازالتی نوع مورب تأیید می­کند. نتایج دما - فشارسنجی تعدادی از این سنگ­ها که بر اساس درجه بندی­های مختلف محاسبه شده­اند دماهایی بین 944 درجه­ی سانتیگراد در گابروها تا 1294 درجه­ی سانتیگراد در پریدوتیت­ها بدست داده است. برای تبلور این سنگ­ها، بر اساس محاسبات نرم افزار ترموکالک هلند و پاول، دماهایی بین 748 درجه­ی سانتیگراد در گابروها تا 1282 درجه­ی سانتیگراد در پریدوتیت­ها و فشارهایی بین 46/17 در گابرو تا 7/24 و 6/33 کیلوبار در پریدوتیت­ها به دست آمدند. اغلب این دماهای به دست آمده بخصوص دماهای ترموکالک برای تبلور این سنگ­ها از ماگمای غنی از منیزیم نوع مورب در یک مرکز گسترش کف اقیانوسی منطقی می­نماید.   }, keywords_fa = {مجموعه‌ی افیولیتی؛ سنگ‌های آذرین مافیک و اولترامافیک؛ سری انباشتی؛ دما- فشارسنجی - بیرجند.}, url = {http://ijcm.ir/article-1-348-en.html}, eprint = {http://ijcm.ir/article-1-348-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Mineralogy, paragenesis, texture and mineral facies of skarns in west of Malayer}, abstract ={Triassic (mostly volcanic-carbonate) and Jurassic (mainly shale and sandstone) rocks in west of Malayer were affected by a number of shear zone, folding, deformation and metamorphic events. Regional metamorphism in the area led to the formation of Triassic and Jurassic rocks such as phyllite, slate and crystalline carbonate which folded during deformational events. In the contact metamorphism event, granitoid plutons with predominantly granodiorite to quartz-diorite composition intruded the metamorphic rocks, forming mineralized skarn zones in Anjireh, Iraneh and SarabSaman areas. The present research shows that plutons producing the mineralized skarn zones in the area are on average granodioritic in composition. Pyroxene and garnet minerals in the skarn zone comprise of diopside, augite and grandite (mainly andradite), respectively. In these skarns, various sub-zones are recognized and defined on the basis of their mineral paragenesis. High temperature facies (pyroxene-fels) formed in the temperature range of 650-800 ºC and wollastonite up to 800 ºC. However, hornblende-fels and albite-epidote-fels facies formed in the temperature ranges 500-650 and 350-500 ºC, respectively.}, Keywords = {Metamorphic facies, paragenesis, mineralogy, fabrics, skarn, west of Malayer}, volume = {20}, Number = {4}, pages = {701-712}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {کانی‌شناسی، پاراژنز، بافت و رخساره‌های کانیایی در اسکارن‌های منطقه‌ی غرب ملایر}, abstract_fa ={در منطقه­ی غرب ­ملایر، ردیف سنگ­های تریاس (بیشتر سنگ­های آتشفشانی و کربناتی) و ژوراسیک (بیشتر شیل و ماسه‌سنگ)، تحت تأثیر چند رویداد دگرگونی، تغییرشکلی، چین‌خوردگی و پهنه‌های برشی قرار گرفته­اند. دگرگونی ناحیه­ای سبب شده است تا سنگ­های تریاس و ژوراسیک به­صورت سنگ­های کربناتی بلورین، اسلیت و فیلیت ظاهر شوند و در خلال رویدادهای تغییرشکلی، دستخوش چین‌خوردگی شوند. در رویداد دگرگونی همبری، توده­های نفوذی گرانیتوئیدی، بیشتر با ترکیب گرانودیوریت تا کوارتز دیوریت، در سنگ­های دگرگون منطقه تزریق شده­ و پهنه­های اسکارنی کانه‌دار را در انجیره، ایرانه و سراب­سامن تشکیل داده‌اند. این پژوهش نشان می‌دهد که میانگین ترکیب توده­های نفوذی مولد پهنه­های اسکارنی منطقه، گرانودیوریتی است و کانی‌های پیروکسن و گارنت در پهنه­های اسکارنی به­ترتیب از نوع دیوپسید- اوژیت و گراندیت (بیشتر آندرادیت) هستند. در این اسکارن­ها، زیرپهنه­های مختلفی شناسایی و براساس پاراژنزهای کانیایی تعریف شدند. رخساره­ی با دمای بالا (پیروکسن­فلس) در گستره­ی دمایی 650 تا 850 درجه­ی سانتی­گراد، و ولاستونیت در گستره­ی دمایی تا 800 درجه­ی سانتی‌گراد تشکیل شده است. اما رخساره­های هورنبلند­فلس و آلبیت- اپیدوت­فلس به­ترتیب در گستره­ی دمایی650-500 و 500-350 درجه­ی سانتی­گراد شکل گرفته­اند.}, keywords_fa = { رخساره‌های دگرگونی؛ پاراژنز؛ کانی‌شناسی؛ بافت؛ اسکارن؛ غرب ملایر.}, url = {http://ijcm.ir/article-1-349-en.html}, eprint = {http://ijcm.ir/article-1-349-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Geology, alteration, mineralization and geochemistry of Gazu prospect area, southeast of Tabas}, abstract ={Gazu prospect area is located about 65Km southeast of Tabas in the southern part of Shotori range. Sub­­-volcanic intermediate intrusive rocks (Upper Cretaceous?), monzonitic to dioritic in composition, intruded into carbonate rocks of Shotori Formation (Triassic) which are the main source for copper mineralization in Gazu district. Alteration zones associated within the intrusive are: Quartz- sericite± pyrite (main type), silicified- sericite, propylitic, silicified- propylitic and strong silicification. The carbonate unit is silicified, near some intrusive rocks, and in some area Skarns were formed. Mineralization occurs mainly as stockwork and disseminated with minor breccia. Veinlet’s type is: Quartz, pyrite, quartz- pyrite, quartz-carbonate-sulfide, carbonate-sulfide and sulfide. The density of quartz-sulfide veinlet with sulfide minerals is about 40 per m2, in some places. An extensive gossan zone is formed due to oxidation of sulfides appeared in intrusive rocks and carbonate unit that due to oxidation of sulfide minerals. The geochemistry of stream sediments are as follow: Cu = 36-1200 (ppm), Pb = 36-125(ppm), Zn = 62- 738 (ppm). Rock chip geochemistry is: Cu = 100-20000 (ppm), Pb = 10-400 (ppm), Zn = 50- 3000 (ppm). High content Cu and Zn are associated with quartz- sericite± pyrite and strong silicification. The evidence shows that the Gazu is porphyry copper and related skarn type system.}, Keywords = {Gazu, porphyry copper, quartz-sericite ± pyrite, stockwork mineralization, Tabas block. لطفاَ در مقاله ارسالی به نکات زیر توجه فرمائید. }, volume = {20}, Number = {4}, pages = {713-726}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {زمین‌شناسی، دگرسانی، کانی‌سازی و ژئوشیمی گستره‌ی پی‌جویی گزو، جنوب شرق طبس}, abstract_fa ={گستره­ی پی­جویی گزو، در فاصله­ی 65 کیلومتری جنوب ­شرق شهر طبس و در بخش جنوبی رشته­کوه شتری قرار گرفته ­است. نفوذ توده­های نیمه­عمیق (کرتاسه فوقانی؟) حدواسط با ترکیب مونزونیتی تا دیوریتی به ­داخل سنگ­های کربناتی سازند شتری به سن تریاس، عامل کانی­سازی مس در منطقه­اند. زون­های دگرسان شناسایی شده در توده­ها نفوذی عبارتند از: کوارتز- سرسیت± پیریت (مهمترین)، سیلیسی- سرسیتی، پروپلیتیک، سیلیسی- پروپلیتیک و سیلیسی­شدن شدید است. دگرسانی کوارتز- سرسیت± پیریت، واحد کربناتی در اطراف توده­ها تحت­تاثیر دگرسانی سیلیسی قرار گرفته و در بعضی نقاط اسکارنی شده­ است. کانی­سازی بیشتر به شکل­های داربستی و افشان و کمتر برش گرمابی دیده می­شود. رگچه­ها عبارتند از: کوارتز، پیریت، کوارتز - پیریت، کوارتز- کربنات- سولفید، کربنات- سولفید، و رگچه­های سولفیدی اکسید شده. تراکم رگچه­های حاوی کانی­های سولفیدی در بعضی نقاط، به بیش از 40 رگچه در متر­مربع نیز می­رسد. زون گوسان گسترده­ای در نتیجه­ی اکسایش کانی­های سولفیدی تشکیل شده است. دامنه­ی تغییرات عناصر در رسوب­های رودخانه­ای به صورت زیر است: مس 36 تا1200 گرم در تن، سرب 36 تا 125 گرم در تن و روی 62 تا 738 گرم در تن. همچنین دامنه­ی تغییرات عناصر در نمونه­های خرده سنگی منطقه گزو به­صورت زیر است: مس 100 تا 20000 گرم در تن، سرب 10 تا 400 گرم در تن و روی 50 تا 3000 گرم در تن. بیشترین میزان مس و روی در دگرسانی­های کوارتز- سرسیت±پیریت و سیلیسی­شدن شدید دیده می­شود. شواهد نشان می­دهد که کانی­سازی منطقه احتمالاً از نوع مس پورفیری و اسکارن وابسته به آن است.}, keywords_fa = {}, url = {http://ijcm.ir/article-1-350-en.html}, eprint = {http://ijcm.ir/article-1-350-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Mineral-chemistry and thermo-barometery of Incheh intrusive body, East of Herris, East-Azarbaidjan.}, abstract ={Incheh granitoid intrusion is located east of Herris, East-Azerbaijan Province. It intruded into the older rock units including Eocene volcanic – volcaniclastics. Compositionally, this intrusion ranges from diorite-quartz diorite to monzonite. Chemical composition of its major minerals such as feldspars, amphibole and clinopyroxene analyzed using electron probe micro-analyzer (EPMA) for thermobarometeric study. The analyzed feldspars are mainly andesine to bytownite and sometimes albite. Clinopyroxenes are diopside to enstatite, and the composition of amphibole ranges from edenite, tremolite, tschermakitic hornblende, tschermakite to actinolite. Geobarometery of this intrusive, based on Al(t) in hornblende and Cpx-Pl-Qz barometers yields, 7±1 and 9-10 kb, respectively. Temperatures of 1000 ± 40ºC and 800-1000ºC are estimated using the continuous reaction between plagioclase – amphibole, and two feldspar thermometers. Thermobarometery based on Al and Ti oxides in amphibole shows temperature of 900ºC at pressures about 6-7 kb for amphibole crystallization in Incheh granitoid.}, Keywords = {Incheh, Herris, thermobarometery, electron probe micro-analyzer, granitoid}, volume = {20}, Number = {4}, pages = {727-738}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {شیمی کانی‌ها و دما- فشار سنجی توده‌ی نفوذی اینچه، (شرق هریس، آذربایجان شرقی)}, abstract_fa ={توده­ی گرانیتوئیدی اینچه در شرق هریس (استان آذربایجان­شرقی) واقع شده و به درون سنگ­های آتشفشانی و آذرآواری ائوسن تزریق شده است. این توده دارای طیف ترکیبی دیوریت، کوارتزدیوریت تا مونزونیت بوده و ترکیب شیمیائی کانی­های اصلی آن نظیر فلدسپارها، آمفیبول و کلینوپیروکسن به منظور منظور دما-فشارسنجی آن با ریزپردازنده­ی (EPMA) آنالیز شد. پلاژیوکلاز اغلب دارای ترکیب آندزینی تا بیتونیتی و گاهی آلبیتی است. کلینوپیروکسن اغلب دارای ترکیب دیوپسید تا انستاتیت بوده و آمفیبول دارای ترکیب ادنیتی تا ترمولیتی، هورنبلند چرماکی، چرماکیت و اکتینولیت است. فشارسنجی این توده بر اساس Al(t) در شبکه­ی آمفیبول و نیز فشارسنجی کلینوپیروکسن - پلاژیوکلاز - کوارتز به ترتیب فشارهائی معادل 1 ± 7 و 9 تا 10 کیلوبار در عمق تبلور این توده پیشنهاد می­کنند. دماسنجی با استفاده از واکنش پیوسته بین پلاژیوکلاز و آمفیبول دمای 40 ± 1000 درجه­ی سانتیگراد و دماسنجی دوفلدسپاری دمای تبلور آن را 1000-800 درجه­ی سانتیگراد نشان می­دهند. دما - فشارسنجی بر مبنای اکسیدهای Al وTi  در آمفیبول نیز دمائی برابر 900 درجه­ی سانتیگراد در فشار حدود 6 تا 7 کیلوبار را برای عمق تبلور آمفیبول نشان می­دهند.}, keywords_fa = {اینچه؛ هریس؛ دما - فشارسنجی؛ ریزپردازنده‌ی الکترونی؛ گرانیتوئید.}, url = {http://ijcm.ir/article-1-351-en.html}, eprint = {http://ijcm.ir/article-1-351-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Paleosols of Devonian Padeha Formation in the Estern-Alborz Zone, NE Iran: Textural, mineralogical and geochemical characteristics}, abstract ={Paleosols of the study area is a part of the Eastern-Alborz Zone which is located about 50 km southeast of Azadshahr. These paleosols developed on floodplain and lacustrine facies of the Devonian Padeha Formation. Based on the field and textural evidences, two major paleosol horizons identified as A and B horizons. The A horizon consists of calcrete and noncalcrete paleosols which is located in the floodplain facies of the Padeha Formation. The B horizon identified in the lacustrine facies and consists of calcrete paleosols. Quartz, calcite, dolomite, microcline, hematite, albite, sericite, illite, chlorite and montmorilonite were identified in the paleosols. Geochemical analyses of the paleosols reveal the enrichment of immobile elements and depletion of mobile elements. Investigations of chemical alteration and effective chemical alteration indices indicate intermediate weathering in the study area. The occurrences of noncalcrete and calcrete paleosols suggest a climate change from humid to dryer condition occurred during soil formation. Combinations of textural, mineralogical and geochemical data indicate an origin of basic igneous rocks for the paleosols of the study area.}, Keywords = {Paleosol, calcrete, Padeha Formation, Eastern- Alborz}, volume = {20}, Number = {4}, pages = {739-750}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {پالئوسل‌های سازند پادها با سن دونین در زون البرز شرقی: ویژگی‌های بافتی، کانی‌شناسی و زمین‌شیمیایی}, abstract_fa ={پالئوسل­های منطقه مورد بررسی که در فاصله­ی 50 کیلومتری جنوب شرقی آزادشهر قرار دارد، بخشی از زون البرز شرقی محسوب می­شود. این پالئوسل­ها در رخساره­های دشت سیلابی و دریاچه­ای سازند پادها با سن دونین قرار دارند. بر اساس شواهد صحرایی و بافتی دو افق اصلی پالئوسل به نام­های A وB شناسایی شدند. افق A از پالئوسل­های کالکریتی و غیرکالکریتی تشکیل یافته ­است و در رخساره­ی دشت سیلابی سازند پادها قرار دارد. افق B در رخساره­ی دریاچه­ای مشاهده می­شود و بیشتر کالکریتی است. کوارتز، کلسیت، دولومیت، میکروکلین، هماتیت، آلبیت، سریسیت، ایلیت، کلریت و مونتموریلونیت در پالئوسل­ها شناسایی شدند. تجزیه و تحلیل­های زمین­شیمیایی پالئوسل­ها بیانگر غنی­شدگی عناصر نامتحرک و تهی­شدگی عناصر متحرک است. بررسی شاخص­های هوازدگی شیمیایی و هوازدگی مؤثر شیمیایی دلالت بر هوازدگی متوسط در منطقه­ی مورد بررسی دارد. تظاهر پالئوسل­های غیرکالکریتی و کالکریتی پیشنهاد­کننده­ی تغییرات آب و هوایی از مرطوب به خشک در طول تشکیل خاک است. تلفیق داده­های بافتی، کانی­شناسی و زمین­شیمیایی نشان­دهنده­ی سنگ مادر بازالتی برای پالئوسل­های مورد بررسی است.}, keywords_fa = {پالئوسل؛ کالکریت؛ سازند پادها؛ البرز شرقی.}, url = {http://ijcm.ir/article-1-352-en.html}, eprint = {http://ijcm.ir/article-1-352-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Adsorption of cerium ion by aminosilane group functionalized MCM-41}, abstract ={In this research, mesoprous compound MCM-41was synthesized by using CTAB as template and TEOS as silica source. In order to increase the adsorption capacity, the surface of the synthesized adsorbent was modified by 3-aminipropyletrimethoxysilane.The structure of the adsorbent was studied by XRD, IR, BET and TG-DTG techniques. For removal of cerium ion from aqueous solutions, NH2­-MCM-41 adsorbent was employed. The effect of experimental conditions including pH, initial cation concentration, contact time and temperature were investigated. Maximal adsorption capacity was obtained at ph = 6.}, Keywords = {Mesoprous MCM-41, adsorption capacity, NH‌2-MCM-41 adsorbent, Ce (III).}, volume = {20}, Number = {4}, pages = {751-758}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {جذب یون سریم (III) به وسیله‌ی MCM-41 عامل‌دار شده با گروه آمینوسیلان}, abstract_fa ={در این پژوهش ماده­ی مزوپروس  MCM-41با استفاده از CTABبه عنوان قالب و  TEOSبه عنوان منبع سیلیکا سنتز شد. به منظور افزایش ظرفیت جذب، سطح جاذب­های سنتز شده با 3- آمینو پروپیل تری متوکسی سیلان اصلاح شد. ساختار جاذب­ها با استفاده از  روش­های XRD، IR ،BET و TG-DTG بررسی شدند. از جاذب  NH2-MCM-41برای حذف یون سریم (III) از محلول آبی مورد استفاده قرار گرفت. اثر شرایط تجربی شامل pH، غلظت اولیه کاتیون، زمان تماس و دما بررسی شدند، و نیز بیشینه­ی جذب در 6 =  pH به دست آمد.}, keywords_fa = {مزوپروس‌MCM-41؛ ظرفیت جذب؛ جاذب‌NH2-MCM-41؛ سریم (III).}, url = {http://ijcm.ir/article-1-353-en.html}, eprint = {http://ijcm.ir/article-1-353-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} } @article{ author = {}, title = {Preparation of Fe3O4-ZnO core - shell nanopowders and comparison of their magnetic and optical Properties}, abstract ={In this study, at first the magnetite (Fe3O4) nano particles were prepared by sol-gel method under inert atmosphere using ferric nitrate (Fe (NO3)3.9H2O) and ethylene glycol (C2H6O2) as precursors. In the next stage, magnetite nanoparticles were modified by Sodium citrate under Ar atmosphere. Also zinc oxaid (ZnO) nanoparticles were provided via co-precipitation route and heat treatment using ammonium carbonate and zinc acetate as precursors. The precursor was dried and then calcined at 350oC. Finally with the ZnO and modified Fe3O4 nanoparticles, core–shell system was produced. X-ray diffraction pattern (XRD) considered structure characteristic and the size of crystallites. Morphology and the average size of particles were determined by SEM and TEM electron microscope. The UV absorption spectra show that absorption wavelength value for Fe3O4/ZnO core-shell is increased in comparison with ZnO pure nanoparticles.  FT-IR Spectra indicated the characteristic absorption of Zn–O bond is at 443/81 cm-1 and   Fe–O bond is at 540/20 m-1. Variation of magnetization of samples with respect to the external field was investigated by Vibrating Sample Magnetometer (VSM). Investigation shows that Fe3O4 nanoparticles are super paramagnetic but Fe3O4/ZnO core-shell nanopowders are ferromagnetic. On the other hand, in core-shell system, the amount of remanence or coercivity field have not had a considerable changes with increasing in molar ratio of ZnO to magnetite.                                                     }, Keywords = {Magnetite, Zinc oxide, Core – shell, Nanoparticle, Sol-gel.}, volume = {20}, Number = {4}, pages = {759-766}, publisher = {Iranian Socity of Crystallography and Mineralogy}, title_fa = {تهیه‌ی نانو پودرهای هسته‌-پوسته‌ی اکسیدهای آهن - رویFe3O4- ZnO) ) و بررسی ویژگی‌های نوری و مغناطیسی آن}, abstract_fa ={در این پژوهش نخست با استفاده از اتیلن گلیکول و نیترات آهن، نانو ذرات مگنتیت  (Fe3O4)به روش سل- ژل تهیه و سپس با سیترات سدیم در اتمسفر آرگون بهینه سازی شد. نانو ذرات اکسید روی نیز به روش هم رسوبی با کربنات آمونیوم و استات روی تهیه و در دمای  oC350 و به مدت 3 ساعت برشته شد. سرانجام باداشتن نانوذرات Fe3O4  و  ZnO  اصلاح شده، سامانه هسته- پوسته ZnO-4 Fe3Oتهیه شد. ویژگی­های ساختاری و میانگین اندازه­ی بلورک­های پودرهای تهیه شده با پراش سنجی پرتو X مورد بررسی قرار گرفت. ریخت­شناسی و اندازه­ی میانگین ذرات با استفاده از تصاویر میکروسکوپ الکترونی روبشی(SEM)  و تراگسیلی (TEM) تعیین و تفسیر شدند. بررسی بیناب­سنجی فروسرخ تبدیل فوریه (FTIR) نشان از تشکیل پیوندهای آلی و معدنی در نمونه­ها دارد به این صورت که ستیغ موجود درcm-181/443 به نوسانات پیوندهایZn-O  و ستیغ واقع در cm-120/540 به ارتعاشات پیوندFe-O وابسته است. برای تعیین طول موج بیشینه جذب، از بیناب­سنجی دیدگانی- فرابنفش (UV-Vis) بهره­گیری شد. نتایج نشان می­دهد که مقدار طول موج بیشینه­ی جذب نانوپودرهای هسته- پوسته در مقایسه با نانوذرات خالص اکسید روی افزایش یافته است. ویژگی­های مغناطیسی نمونه­های پودری با اندازه­گیری تغییرات مغناطش بر حسب میدان مغناطیسی با استفاده از یک مغناطش­سنج  لرزه­ای VSM)) مورد بررسی قرار گرفت. نتایج نشان می­دهد که نانوذرات مگنتیت ابرپارامغناطیس هستند. از سویی در  نمونه­ی هسته- پوسته، با افزایش نسبت مولی اکسید روی به مگنتیت، مقدار میدان وادارندگی تغییرات چندانی نداشته است.}, keywords_fa = {مگنتیت؛ اکسید روی؛ سامانه هسته پوسته؛ نانو ذره؛ سل- ژل.}, url = {http://ijcm.ir/article-1-354-en.html}, eprint = {http://ijcm.ir/article-1-354-en.pdf}, journal = {Iranian Journal of Crystallography and Mineralogy}, issn = {1726-3689}, eissn = {2588-4719}, year = {2012} }